Vba To Rename Pdf Files In Directory |
Vba To Rename Pdf Files In Directory - Excel |
|
http://www.mrexcel.com/board2/viewto...ghlight=rename
can anyone help with this code or figure out why it cannot find any files. This is my code:
Sub Find()
Dim i As Integer
With Application.FileSearch
.LookIn = "C:\Test"
.Filename = "Test*.*"
If .Execute > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
For i = 1 To .FoundFiles.Count
MsgBox .FoundFiles(i)
Next i
Else
MsgBox "There were no files found."
End If
End With
End Sub
Thanks
Similar Topics
Code:
Sub test() Name "C:\myfolder\*.aqi" As "C:\myfolder\*.csv" End Sub
The problem is that VBA does not accept wild cards (at least as given here).
Any suggestions?
Thanks
abe
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
It does this using the indirect function because it needs to concatenate the
path and filename from other cells.
Problem is that if workbook B is closed, the cell in workbook A shows #REF!.
So can indirect work using closed external files or must the external files
be opened?
Is there a clever way of making that work?
Thanks!
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).
No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:
regsvr32 /u c:\windows\system32\MSCOMCT2.OCX
(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:
regsvr32 c:\windows\system32\MSCOMCT2.OCX
and what do you know - it worked.
Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
i use in it alot of formulas and conditional formats
thank u
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
I can calculate the formula for this , but the problem comes where for eg there is a loss in Jan 2008 for -95415 and there was a profit in Jan 2007 for 80215. How do I set up formula to take negatives & positives into account in calculating the increase or decrease/
Your assistance or anybody's on the forum will be greatly appreciated
Regards
Howard
http://www.mrexcel.com/forum/showthr...ghlight=howardneed
I have the following code:
Code:
Sub Development() Pass = InputBox("Please enter development password", "Password") If Pass = "XYZ" Then UnhideAll Else: MsgBox ("Password incorrect, please try again") End If End Sub
This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.
Help!
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
Until now I have been able to find all my answers through searches. As a VBA novice, it has been very helpful. I am stumped on this one, however. I am trying to autofill from the selected cell in Column C down. I would like it to stop at the last cell with data in Column B. This is the code I have so far:
Range("C2").Select
Selection.AutoFill Destination:=Range(Selection, Selection.End(xlDown))
This does the autofill, but doesn't stop at the last cell with data in Column B.
In the past I have use this code to acheive similar results:
Dim endRow As Long
endRow = Cells(Rows.Count, "B").End(xlUp).Row
Range("C2").AutoFill Destination:=Range("C2:C" & endRow)
The problem with this code is that I will not always be starting in "C2". I need code that uses whatever the selected cell is.
All help is appreciated. Thanks!
I have a piece of code called ConvertDates that formats data contained on 6 worksheets. The 6 data sheets all contain a data connection to a website of foreign exchange tables.
What I want is for my code to execute as soon as the data connection refresh has finished.
When I use the statement
Code:
ActiveWorkbook.RefreshAll Application.Run "Project1.xlsm!ConvertDates"
The code executes the macro whilst the refresh is still happening, thereby screwing up my results. I don't really want to use a timed wait, because the refresh speed is going to vary from user to user.
Is there some way I can tell excel to wait till the refresh has finished and then execute the code?
Any help would be hugely appreciated.
Does anyone know of a way to unhide this macro?
Thanks!
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug