Charts On A Worksheet. Keeping The Plot Area Size Constant |
Charts On A Worksheet. Keeping The Plot Area Size Constant - Excel |
|
Any help would be appreciated...
Thanks
Similar Topics
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
include/exclude one of the series to see how the chart changes, all the
colors change and we have to spend time re-identifying which series is
which, using the legend to check the colors.
Is there a way to "lock" the colors, so that the bars stay the same colors
regardless of whether other bars are included/excluded?
Thanks!
Keith
When I create a bar chart, the bars are horizontal. I want the chart bars to be vertical. It tried to rotate the chart so that it is vertical, but the "rotate" options are greyed out.
How do I get those bars vertical?
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
ie. add points to find their concentration on a standard curve.
How do I enter the value in a cell (say B4) into a formula as a constant so it doesn't change when I copy it down the column?
For example,
B4 = 2.4 (a constant)
This is the result I want:
F6 =C8 + B4*4.243
F7 =C9 + B4*4.243
F8 =C10 + B4*4.243
B4 remains constant as I copy F6 down.
What's the correct formula for F6 so I can copy it down and keep B4 fixed?
Thanks.
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select Range("A1:N18").Select ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
I have created a complex formula to help me calculating Golf handicaps for players.
The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.
But ALL the values change and I want some to change and some to stay constant.
How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.
Many thanks for your help
Ole
I have two worksheets and wish to copy rows from worksheet 1 to worksheet 2 if a condition is met in one of the cells within that row.
Hope that makes sense.
Thanks
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.
Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).
There will be a varying number of rows in each of the individual sheets.
If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
If anyone can help it would really cut down the time I spend collating these stats every day!
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt