Needle Position On Speedometer Graph That Uses 300 Degrees Vice 180 Degrees. |
Needle Position On Speedometer Graph That Uses 300 Degrees Vice 180 Degrees. - Excel |
|
I have my other speedometer graphs that are 180 degrees working fine, however the boss is looking for one that looks like a tachometer. I have my layout done just fine with the doughnut graph but I'm having a hard time with getting the needle from the pie chart to work the entire way around the 300 degrees. File is attached and I'm hoping someone can help. Thanks in advance.
Royce
Similar Topics
How do I enter this into a cell
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
What could be wrong?
I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.
Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.
Thanks,
Dave
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
The sheet/workbook are not protected, nor shared, there is no VBA code in the file...
Does anyone knows what else can it be? Everything else is working fine!!!
thanks
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers - including negatives.
If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
Say I had a line graph for 4 years and I wanted it to be a solid line for the first three and a dashed line for the last one, is that possible?
Many thanks for your help
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.
Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.
Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.
Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.
Can anyone assist?
Thanks!
I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.
I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.
Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.
It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.
I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.
I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.
I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!
Thanks very much for your time.
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.
The days of the week consists of "Name" "Date" Hours"
The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"
Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.
I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.
I have attached a sample file.
Thanks in advance for your help.
I am trying to calculate our On Time Delivery. I want this as a simple percentage of jobs. I have got this running in the following way:
Column M - Estimated Delivery dates
Column N - Actual Delivery dates
Column O - =IF(SUM(M2-N2)>0,1,0)
Then I have calculated On Time Delivery as: =SUM((SUM(O2:O252))/(COUNTA(N2:N252)))
This seems to work fine. My problem is, if we enter a date in Estimated without a corresponding Actual date, the formula for Column O fills out anyway and improves our On Time Delivery Percentage. How can I set this up so that the formula doesn't calculate if there is no data in Column N?
Any help much appreciated
Thanks,
James
Please help!!!
We have a client who will pay using the 1/4, 1/2/ and 3/4 of an hour increments as follows:
From the hour mark to 6 minutes = 0 time paid
Over 7 minutes to 15 minutes = 1/4 hour 15
16 minutes to 30 minutes = 1/2 hour 30
30 minutes to 45 minutes = 3/4 hour 45
46 minutes to 60 minutes = one hour.
They work on shifts and the operation is 24 hours. Each gets 30 minutes for breaks which is not paid. Pay is biweekly and overtime is anything over 40 hours. Currently, the template we are using looks like this (sorry, I could not figure out how to paste it so you can see it in Excel layout):
WEEK 1 Sunday Monday Tuesday Wednesday Thursday Friday Saturday
5/16 5/17 5/18 5/19 5/20 5/21 5/22
TIME IN ENTER TIME, INCLUDE AM OR PM
TIME OUT
TIME IN
TIME OUT
TIME IN
TIME OUT
TIME IN Total Hours First Week
TIME OUT
HOURS WORKED-OR- choose one
*HOLIDAY WORKED
PAID HOLIDAY (not worked)
*OTHER PAID HOURS
EXPLANATION OF *HOLIDAY WORKED HRS OR *OTHER
I am very new to Excel and need help creating a formula that will allow us to calculate this timesheet? I am in desperate need for help.
Thanks..
excel????
I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.
Someone has any idea of what could be the problem?
thanks
NA
include/exclude one of the series to see how the chart changes, all the
colors change and we have to spend time re-identifying which series is
which, using the legend to check the colors.
Is there a way to "lock" the colors, so that the bars stay the same colors
regardless of whether other bars are included/excluded?
Thanks!
Keith