Override Conditional Formatting

Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy

Hello.

I have two huge excel files, with many rows and columns, they "should" look the same.

But I need to find out if anything has been added or removed from the second one compared to the first one.

Which is the easiest way to accomplish this?

Searched this forum and Google but couldn't find what i was looking for.

Thanks in advance!

Could you guide me please....

I need to insert 5 blank rows repeatedly between every existing data rows
for approximately 300 rows.

If I go about doing the repeat short-cut "Control+Y", it just repeats
inserting ONE row only between the consecutive data row.

Is there some command, which helps me highlight all the rows & allows me to
insert 5 blank rows between every consecutive existing data row?

Thanks in advance for your kind advice.

How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do

If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.

The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).

If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.

I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?

=SUMIF(D3:D13,"criteria",D3:D13)

I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)

It might just be that I don't know what this means in Help:

"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).

Can anyone help?

How can I make a cell or the font of the cell flash or blink? I assume that
it is a function of conditional formatting. I know it is possible because I
have seen it before but I do not know how to do it.

I often use if statements to return empty cells, for example:

=IF(a1=0,"ERROR","")

The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.

Is there a way to designate, in such a formula as above, to return a TRULY empty cell?

Thanks

Hi guys,

would really appreciate anyones help with this.

I have a column full of text-formatted fractions...

4/5
6/4
3/1
2/5
4/5

etc, etc.....the column is very long!!

I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.

If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!

Any suggestions on how I could speed this up?

thanks

Hi,

Try this...

There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.

Can we implement this formula?

IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}

Thanks in advance...

Hi, this is something so simple that I have forgotten how to do it.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"

so in summary,

if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.

Thanks in Advance for the help

Mutley13

We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!

Hey

I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.

Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.

I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.

Thanks for any help anyone can provide.

Aaz

I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo

is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)

There sure is...Here's how:

From the Excel main menu:
<data><group and outline><settings>
Uncheck: Summary rows below detail

Does that help?
***********
Regards,
Ron

XL2002, WinXP


"JMSprout" wrote:

> When you highlight rows, go to Data, then Group or Outline, then Group, it
> creates a nice plus/minus expand/collapse box for that group, only when the
> group is expanded the button to collapse it is at the bottom row of the
> group. Is there a way to get this button located at the top row of the group?