How Do I Export An Excel Graph To An Encapsulated Postscript (.ep.

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

Hey everyone,

I'm really hoping someone can help me with this...

I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?

Is there any way to stop a macro from running when it gets hung up and my excel is "Not Responding"? Now I have to blow it up which is not a desirable method especially when I have made changes that I wanted to save.

Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.


Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.

My problem is ... Now what?

I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.

Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.

Can anyone help? Let me know if you need me to clarify.

Thanks!

Matt

We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!

I have the strangest problem... somehow, right clicking a cell doesn't
bring up a menu anymore. It happens only when I'm in Excel only... it still
works even if I bring up macro editor within Excel... it only doesn't work
when I'm in Excel. I've tried Options and Customize... nothing there seems
to work...
HELP!!!

Regarding Charts in Excel:

Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??

I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.

But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.

For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.

Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??

Thanks

StanSz

Hi
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?

Thanks in advance.

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?

Hello,

I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.

Hi, this is something so simple that I have forgotten how to do it.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"

so in summary,

if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.

Thanks in Advance for the help

Mutley13

I have a large database with names, addresses etc. When I try to make changes
to the email address, like change the font color or change on letter, Excel
tries to email the address. If I click in the formula bar to make the
changes, it automatically changes it back to all blue text and underlined. I
have tried to format all of the cells as "Text" to show as entered, but it
doesnt work. PLEASE HELP

Hello.

I have two huge excel files, with many rows and columns, they "should" look the same.

But I need to find out if anything has been added or removed from the second one compared to the first one.

Which is the easiest way to accomplish this?

Searched this forum and Google but couldn't find what i was looking for.

Thanks in advance!

I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.

Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?

For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?

I hope this makes sense. Thank you in advance for any help.