List Out Named Ranges With Vba |
List Out Named Ranges With Vba - Excel |
|
I have a file with a number of named ranges. I would like to have a routine that lists out all of the named ranges (throughout the file, not just on one page) and display all of these names on a sheet.
I have come up with this loop, but it doesn't work exactly right just yet.
Basically, it gets to the last name in the workbook and then fills in 100 cells with the range. I arbitrarily picked 100; I really would like to loop through all named ranges in the file, whether there are 10, 100, or 1000 ranges.
I would like each row to be a unique name. Is there a way to list the name AND the range that the name refers to?
Thanks in advance.
Kind Regards,
Sean
Public Sub ShowNames()
Dim Nm As Name
Dim i As Long
For Each Nm In ActiveWorkbook.Names
For i = 1 To 100
Range("A1").Offset(i, 0).Value = Nm
Next i
Next Nm
End Sub
Similar Topics
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
This is a very basic question, but i have been struggling for hours, so I must ask.
I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:
Sub Button1_Click() Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange") UserForm1.Show End Sub
I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated
regards
jim
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Code:
Windows("File.xls").Activate
But what if the File.xls was a variable named File?
I have tried this:
Code:
Windows(File).Activate
Without success. Please advise.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
eliminate from the sheet the filtered-out rows. So when I refilter the sheet
with new items to get rid of, the old filtered items come back. I've tried
copying the range to another file, but I always get all the old data in the
new file.
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
This macro is amazingly straight-forward:
Public Sub SaveAsA1()
ThisFile = Range("A1").Value
ActiveWorkbook.SaveAs Filename:=ThisFile
End Sub
I'm totally lost on this "amazingly straight-forward" macro!!!! Could someone help if I tell you the SAVE location? It's T:\COMMISSIONING\IJT\TIMELOG project\Staff#1. I'm just not certain what value I'm replacing in the Macro above.
Any help appreciated..
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
it as a drop-down list, you can select a name from the drop-down and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent - Very Good - Good -
Fair - Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a drop-down, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.
Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.
Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.
Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.
Can anyone assist?
Thanks!
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
Im using :
'wait until the page loads
Do While ie.Busy Or ie.readyState READYSTATE_COMPLETE
DoEvents
Loop
This doesnt seem to work well enough, since actions are occuring that should NOT occur until the browser is ready.
Any other ideas as to how to make IE wait until the page is completely ready? I wondered about possibly checking the .innerHTML to verify that a unique page element is present.
Thanks,
Scott
Sub OpenPDF() 'Dim pdf As String On Error Resume Next 'pdf file to open pdf = "K:\PDF\mypdf.pdf" 'open the pdf file ActiveWorkbook.FollowHyperlink pdf End Sub
So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!
The code I'm using is Code:
Sub OpenPDF() Dim pdf As AcroPDDoc Dim strPDF As String Set pdf = CreateObject("AcroExch.PDDoc") 'pdf file to open strPDF = "K:\PDF\mypdf.pdf" 'open the pdf file pdf.Open strPDF End Sub
Any ideas what could be wrong with either approach?
Thank-you
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?