Active X Scroll Bar Max Value

How do I restrict what I see on my screen (and specifically, limit the scroll
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?

Hi,

I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.

Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.

Thanks.

Hi,

This is a very basic question, but i have been struggling for hours, so I must ask.

I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:

Sub Button1_Click()
Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange")
UserForm1.Show
End Sub

I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated

regards
jim

Hi-

I am brand new to Mr. Excel and would love some advice.

I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.

I am using Excel 2007

How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.

Any help is greatly appreciated!

John

Hi All,

I am trying to make excel automatically add a leading zero to values which are 5 digits long;

i.e. number input is 15185, then excel automatically changes it to 015185.

If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.

Is there any way of writing a small macro to sort this out.

The numbers would be input into range B16:223.

Many thanks,


Andy

I am creating a basic accounting spreadsheet and I ask for assistance to automate data entry posts. I would like to have entries that are entered in the general journal automatically post to the corresponding ledger accounts. The entries need to remain in chronological order. Relative cell referencing will not work because the rows in the ledgers will not correlate to the rows in the journal because the journal but the entries in the ledger need to input on the next available row in that ledger account. Additionally, as the number of entries increase, can the ledger accounts add a new row?

Attached is a very simple example with three transactions. I have included an end state view in the ledger accounts tab.

Hi there,

I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!

In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:

=Sheet1!A3 (or whichever cell it is)

That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).

If anyone could point me in the right direction, I'd be very very grateful. Thanks.

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

Is there a way to calculate the average days between a column of dates?

Basically, I've got a sheet that contains a table of entries, and each entry gets a date stamp in the first column. I would like to have the sheet display the average time, in days, between entries. Is this possible?

Thank you in advance!
~cp

Hello,

Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?

Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.

Does anyone know of a function that I can apply for this?

Hi all,

I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from -100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:-

I feel like this should be really easy and I am just out of it today but I cannot figure this out. I want to lock a row and filter (with filter,not sort, tool) the other rows. I attached an example

The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!

I had to create the information in tables and went from there. Got it. Thanks!

I was wondering if anyone could help me out please?!?!

I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??

Example:

Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.

I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...

P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...

I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps

-Aric

Hi there. I know it sound like a really simple thing but its really stumped me.

Instead of the y axis being on the left hand side, i wish for it to cut at 0,0. I have positive and negative values and I need it to be in the centre instead of on the left.

I have tried formatting both the axis and it would appear that the x axis already cuts the y axis in the right posistion so i need to format the x axis to make the y axis cut it at 0,0. I have already tried typing in 0 instead of 1 and it keeps saying it need to be number more than or equal to 1.

Any help would be greatly appreciated.

Nicole