Array Formula To Ignore Blank Cells |
Array Formula To Ignore Blank Cells - Excel |
|
Hi! I've been perusing a spreadsheet in Excel 2003 I've been working on with lots of array formulas to calculate averages based on two criteria. I thought my formulas were working until I discovered my averages seemed abnormally low. I checked this using a filter on the data and confirmed it.
I have several cases where there is no data to average for a cell, but the cell is counted since it meets the two if criteria. I believe the array is then counting this as a zero and averaging accordingly.
Is there an easy way to write the array formula to ignore the blank cells?
Here, for example, is what I am doing now:
=AVERAGE(IF(SUMMARY!$AF$2:SUMMARY!$AF$300=$A3,IF(SUMMARY!$BK$2:SUMMARY!$BK$300=$A$2,SUMMARY!BG$2:SUM MARY!BG$300)))
I want the cell to go to the Summary tab, check column AF and BK and then if the two criteria are met, average the data in cell BG. However, there are one or two rows in BG that are blank in some cases. How do I write the formula to exclude those cells?
Thanks for your help. I can attach a spreadsheet if necessary.
I have several cases where there is no data to average for a cell, but the cell is counted since it meets the two if criteria. I believe the array is then counting this as a zero and averaging accordingly.
Is there an easy way to write the array formula to ignore the blank cells?
Here, for example, is what I am doing now:
=AVERAGE(IF(SUMMARY!$AF$2:SUMMARY!$AF$300=$A3,IF(SUMMARY!$BK$2:SUMMARY!$BK$300=$A$2,SUMMARY!BG$2:SUM MARY!BG$300)))
I want the cell to go to the Summary tab, check column AF and BK and then if the two criteria are met, average the data in cell BG. However, there are one or two rows in BG that are blank in some cases. How do I write the formula to exclude those cells?
Thanks for your help. I can attach a spreadsheet if necessary.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi There
Im trying to Sum the total of a number of cells using the following formula:
=SUM(F57,H57,J57,L57,P57,N57,D57,,R57,V57,T57,X57)
however some of those cells might be blanks as they are dependant on other data. The probelm im having is that when they are blank i am getting the the sum as 0. i know this isnt the case but dont know how to rectify my code.
Im trying to Sum the total of a number of cells using the following formula:
=SUM(F57,H57,J57,L57,P57,N57,D57,,R57,V57,T57,X57)
however some of those cells might be blanks as they are dependant on other data. The probelm im having is that when they are blank i am getting the the sum as 0. i know this isnt the case but dont know how to rectify my code.
Hello,
I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:
01/01/2007
02/01/2007
03/01/2007
I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.
Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!
Many thanks,
Caitlin
I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:
01/01/2007
02/01/2007
03/01/2007
I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.
Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!
Many thanks,
Caitlin
I have a spreadsheet with simple (addition/subtraction) formulas. The file is quite large and the formulas are too. All of a sudden, the formulas stopped working except when I double click in the cell containing the actual formula. For example, if I enter "2" in each cell, A2 and B2, cell B3 should reflect "4" because there is a formula in cell B3 which totals cells A2 and B2. Only by double clicking on cell B3 will the program actually calculate. I'm totally perplexed and so is my IT contact. Anyone?
I am using Data Validation and I don't want the user to go past a cell without putting in an entry. When I leave the box (ignore blank) unchecked it doesn't do anything after I have protected the document.
Help
Help
From limited experience I know that excel calculates dates via serial numbers.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)
I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.
What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?
Hopefully a simpler question for your experience level than mine.
I have two columns in my spreadsheet. Column A has no blank fields, Column B has some blank fields. I would like to show the text from Column A in the same row of Column B only when Column B is blank.
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
Hello All, I have a column where cells need to be 50 characters long, it contains addresses, however, since all the addresses do not meat the criteria, I need to add (blank spaces) to reach the 50 characters, any idea on how to approach this?
Example
Fire Street #50 this cell contains 17 characters therefore I need to add the rest by adding blank spaces to reach 50 characters, otherwise the system I am exporting the data will not understand this cell
Example
Fire Street #50 this cell contains 17 characters therefore I need to add the rest by adding blank spaces to reach 50 characters, otherwise the system I am exporting the data will not understand this cell
Hi!
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
hi,
I would like a formula that would list all the items in row B that match the criteria in row A. the first cell with formula would list the first item, the second cell with the formula would list the next item, and so forth. Also, column B might have a duplicates that should be listed. Is this possible? I cannot manipulate the order of the original items (ie, filters) because this data is being used to derive other formulas.
I would like a formula that would list all the items in row B that match the criteria in row A. the first cell with formula would list the first item, the second cell with the formula would list the next item, and so forth. Also, column B might have a duplicates that should be listed. Is this possible? I cannot manipulate the order of the original items (ie, filters) because this data is being used to derive other formulas.
This is my first post in these forums.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
Hi everyone,
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
is it possible to put two formulasinto one cell?
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
I am trying to calculate the average Talk Time into Minutes and Seconds. Every time I have tried, I get the wrong average.
For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.
What would the formula be to get the correct average time?
For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.
What would the formula be to get the correct average time?
Hi there,
I have a spreadsheet with some cells setup with a drop-down list containing
Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change
back to a blank field I have to invoke the soft keyboard, activate the cell
and hit backspace then close the soft keyboard - quite a long-winded
procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert
back to a blank I can just use the stylus to choose a blank from the chooser
list.
How do I add the option of inputting a blank from the Data Validation List
bearing in mind I am using the Data Validation Source box for entering my
choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
Although not a betting man I would wager there is a simple 'fix' for this
but things are only simple if you know how in the first instance! ;^)
--
Thanks & regards,
-pp-
I have a spreadsheet with some cells setup with a drop-down list containing
Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change
back to a blank field I have to invoke the soft keyboard, activate the cell
and hit backspace then close the soft keyboard - quite a long-winded
procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert
back to a blank I can just use the stylus to choose a blank from the chooser
list.
How do I add the option of inputting a blank from the Data Validation List
bearing in mind I am using the Data Validation Source box for entering my
choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
Although not a betting man I would wager there is a simple 'fix' for this
but things are only simple if you know how in the first instance! ;^)
--
Thanks & regards,
-pp-
I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
I have a formula in cell C1 (=A1/B1). I want to copy this formula down to row C20, however rows A2 to A20 are empty so C2 to C20 show (#DIVO!). Is there something I can put in the formula to make column C be blank until the data is enter into Columns A & B?
I am using the following formula to calculate the number of days between a date and the current date: =DATEDIF(A1,TODAY(),"d") What do I add to the formula to leave cell blank if no date is entered in the cell for calculation.
Hi
I have a table with various percentages, and I would like a formula to have an average of these. Please see attached file to get more of an idea.
Thanks
G
I have a table with various percentages, and I would like a formula to have an average of these. Please see attached file to get more of an idea.
Thanks
G