Disable All Kinds Of Messages/warnings/alerts In Excel?

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub

I have a sheet with a list of names on and I've noticed that when I use ctrl+F to use the find function, even when I know i have entered the correct name it still will not work. I have identifed times when I know the name is there on the sheet, but the find function says "Excel cannot find the data you are searching for"

Im unable to put any pics up as my work pc has java disable so photobucket ect won't work but has anyone else come across this problem and how did you rectify it? A search macro perhaps?

Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!

I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.

I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?

______________________

Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.

If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...

Any help would be much appreciated. This is driving me nuts!

I have a VBMacro Excel file loaded on a Server that numerous people access. A Macro in this file creates a Copy of a specific Sheet within the Active Workbook and I want to Save it to the individual's Desktop.

How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?

Example User's path: 'C:\Documents and Settings\jfarc\Desktop'

Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.

Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.

I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:

Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path

Dear All,
I have around 250 Employees Payroll and i am preparing the Payslip in Excell manully. I have all the Salary details in Sheet1 and in Sheet2 is Payslip. I request all of you to please help me so that i can take the printout of all the employees in sheet1 by at a time. Now im entering one by one employees code and then taking the prinout..
Please provide me with any Formulas as micros are disable in my Computer.....

Waiting for an early reply.......

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

After entering a text in a cell or in the function field, when i go back in
the cell an apostrophe apear in front of the text.

How can i correct this?

Thank you

I am trying to insert a range of cell in the body of an outlook email with the same format. The code I am using now is below and it does insert anything in the email body.

Code:

Sub Mail()
Dim OutApp As Object
    Dim OutMail As Object
    Set OutApp = CreateObject("Outlook.Application")
    OutApp.Session.Logon
    Set OutMail = OutApp.CreateItem(0)
    On Error Resume Next
    With OutMail
        .To = "cbelcher@jpfryelaw.com"
        .CC = ""
        .BCC = ""
        .Subject = "Burden Report"
        .Body = ActiveSheet.Range("A1:D12")
        .Attachments.Add ("C:\Documents and   Settings\cbelcher\Desktop\Burden Report.xls")
End With
    On Error GoTo 0
    Set OutMail = Nothing
    Set OutApp = Nothing
    Set objMsg = Nothing
End Sub

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

Hi all,

The following code is placed in workbook 'A' and is used to open workbook 'B'. These workbooks will now always be housed in the same directory and i want to change the code to use a relative path reference by determining the path of workbook 'A'. here's what I had:

Sub income_statement()

Application.WindowState = xlMaximized
Application.Workbooks.Open "C:\Documents and Settings\.....\workbook B.xls", UpdateLinks:=xlUpdateLinksAlways

End Sub

could you suggest how to change this to use a relative path reference?

Is it possible to share a workbook with macros and have the macros work properly. I have one spreadsheet that needs to be shared by many users. We want to all be in the same document at the same time saving changes. The real catch is that the workbook has macros. I used the 'Share Workbook' function under tools. At the end of the setup, it told me that the macros would not work properly. The odd thing is that everytime I try to click on one of the macros I get an error, but yet the macro still performs the function. So essentially the macro works, it is just a pain because you have to click 'end' everytime on the error screen. Any suggestions?

Alanda

Hello,

As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).

Code:

Sub AddImage()
Dim strPath As String
Dim strFile As String
Dim Picture As Object
Dim Response As String
Dim C As Range
strPath = "C:\\Photos\"
 
For Each C In Range("A1", Range("A65536").End(xlUp))
    If C  0 Then
        With C.Offset(0, 1)
            Set Picture = Nothing
            On Error Resume Next
            Set Picture = Sheets("Raw Pix").Pictures.Insert(strPath & C.Value & ".jpg")
            Picture.Top = .Top
            Picture.Left = .Left
            Picture.LockAspectRatio = msoTrue
            Picture.Width = 157
            Picture.Height = 138

        
    End With
    End If
     
NextC:
Next C
End Sub

I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.

Please help

Thanks!