Vlookup Within A Countif...is This Possible? 
Vlookup Within A Countif...is This Possible?  Excel 

I am hoping for some assistance. Here is what I have....
I am trying to get counts of certain values.
This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.
An example of the formula is below...what am I missing?
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))
Thank you in advance for your assistance.
Similar Topics
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 16).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
I have the following in G2:
=VLOOKUP(A2,Sheet1!A:D,4,FALSE)
The formula returns the correct result, which in this case is a number  2
When I fill down my range, the formula copies correctly, but every result is the same. 2.
However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.
Any ideas whats going wrong?
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase
I am trying to reference a cell on another worksheet, the cell is formatted to be a date. when i put in the following formula =Sheet2!A1 and i don't input a date into A1 on sheet 2 the cell containing the formula shows the date 00/01/1900, is there any way of stopping this showing, ideally the cell would be blank until I inputted a date into A1 on sheet 2
Any help would be very much appreciated
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
Many Thanks
Karamazov
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B

1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
click double click on the cell before the formula recognises the account
number. I have to do this for each cell. I have tried different formats. It
is not saving me that much time.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!
In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:
=Sheet1!A3 (or whichever cell it is)
That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).
If anyone could point me in the right direction, I'd be very very grateful. Thanks.
1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1
how to count number of occurances where value of 1 is 3 consecutive times? Obviously answer is 3 in this instance but is there an excel formula to count/sum this?
Thanks in advance
If I drag a formula to the right it adapts the column letter in the formula from A to column B, which is standard Excel functionality.
However, if I drag the formula to the right I want Excel to skip a column each time.
In other words:
=A1 ; = B1 ; = C1
Should be
=A1 ; = C1 ; = E1 etc...
Is there an easy trick to do this?
Thanks,
Michiel
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00  12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
Shane
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
Someone once showed me how if you have a a reference to a cell in one sheet
you could double click on the cell and it would jump to the referenced cell
in the reference cell's sheet.
For example.
Cell With Reference Referenced Cell in other
Sheet
A1 <double click sheet1 cell A1 takes you to > =Sheet2!A1