Filter For Multiple Text Words

Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?

For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?

I hope this makes sense. Thank you in advance for any help.

I am using below code, but it only untill 19,999. Amount from 20,000 and above only show thousand? Please help!

For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only

For 20,000 and above it show
Ringgit Malaysia : Thousand Only

Code as below:

Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"

tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"

FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)

If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If

If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If

For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If

If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i

If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If

FIGURE = Mid(FIGURE, 2)

If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If


FIGURE = Mid(FIGURE, 4)


If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function

Hi
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?

Thanks in advance.

Hi,

I am using

ActiveSheet.ShowAllData

in a piece of VBA and it causes an error if the sheet does not have a filter applied! Is there an if statement I can use to check if the data is filtered?

Thanks - this site is an absolute life saver!

Rich

i know how to use the data filters vertically but have been wondering if its possible to filter data horizontally so i could put a filter on, say column c and sort the data across the sheet rather than down. if its not possible i will find another way to do what i want but this seems to be just what i would need. does anyone know if it can be done?

I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!

I am using below code to Select the Visible rows in the target range:

Code:

Range("A:p").SpecialCells(xlCellTypeVisible).Select

Problems in this code a

1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.

2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.

E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6

3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.

Some one please revert with the solution.
Thanks in advance.

I am trying to filter a list of records by the value in a cell and then (for the filtered result(s)) change the value in column Y just for the filtered results. This is the code I have at present which filters the records OK but I can't fathom what I need to do to ensure I only chnage the value of the cell(s) in column Y?

[CODE]ActiveSheet.Range("$A$1:$DC$5000").AutoFilter Field:=1, Criteria1:="GI255"
'After filtering I want to change the value in column Y for only the filtered entries CODE]

This formula should be very often to use, but i cant found it anywhere, so i ask this here




For example in a1 is :
mike is playing basketball, he is very great player

i want to make it in b1 to be uppercase only in first letter so :
Mike is playing basketball, he is very great player






i know about proper formula =proper(a1) , but proper formula is make uppercase to all first letter in all words, we just need first letter in first words to be uppercase (and to every first words after dot if it can)

Hi everyone,

I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.

The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.

Thanks for your time!

Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (mis-spellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've mis-remembered how this control works, or if there is a setting I can't find.

My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.

Thanks!

T

After you filter out data, how to you re-number the row numbers so they are, again, consecutive?

Hi,
I am looking for a method/formula that will reverse multiple text entries from "abcde" to "edcba". The entries are composed of several words that need to be reversed ie from "ab cde fg" to "gf edc ba"

Thanks

I've tried pressing shift+enter but I can't get it!

When I auto filter a spreadsheet, I can't figure out how to delete or
eliminate from the sheet the filtered-out rows. So when I refilter the sheet
with new items to get rid of, the old filtered items come back. I've tried
copying the range to another file, but I always get all the old data in the
new file.

Hi All,

Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?

Thanks in advance.
Cheers Kaite