Unselect/deselect All Cells With Vba

I've been using Excel for years and had very few issues. However, I recently went into a spreadsheet to update it and was unable to select and enter data into an individual cell. When I click on a cell and try to enter #s nothing happens (my num lock is on). Then when I try to click into another cell it just highlights that cell, along with any other that I move my cursor over. Once I click on one cell I can't stop the highlighting from happening. I can't even click on anything in the toolbar. I am extremely confused, can anyone help?

Hello all,

Until now I have been able to find all my answers through searches. As a VBA novice, it has been very helpful. I am stumped on this one, however. I am trying to autofill from the selected cell in Column C down. I would like it to stop at the last cell with data in Column B. This is the code I have so far:

Range("C2").Select
Selection.AutoFill Destination:=Range(Selection, Selection.End(xlDown))

This does the autofill, but doesn't stop at the last cell with data in Column B.

In the past I have use this code to acheive similar results:

Dim endRow As Long
endRow = Cells(Rows.Count, "B").End(xlUp).Row
Range("C2").AutoFill Destination:=Range("C2:C" & endRow)

The problem with this code is that I will not always be starting in "C2". I need code that uses whatever the selected cell is.

All help is appreciated. Thanks!

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

Hi folks,

My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).

I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .

Do any of you know how to make it so Tab goes back to just moving one cell to the right again?

Thanks in advanced.

I have a problem sometimes. I will click on a cell to add information.
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.


The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.

Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.

Thanks for any advice,

Hi All,

I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :

Code:

Private Sub CommandButton2_Click()
 'REMOVE SELECTION
 
  Dim I As Long
 
    With ListBox1
      For I = .ListCount - 1 To 0 Step -1
       If .Selected(I) Then
           .RemoveItem I
           Sheets("URL List").Rows(I + 2).EntireRow.Delete
           
        End If
      Next I
    
End With

End Sub

Thanks a lot for your help in advance.

Hi

I am looking for a formula to remove special characters and spaces from a cell

I have been using "substitute" but this requires me to know which character I want to remove and this isn't always known

I have tried looking at some macro solutions but became lost quite quickly

Any help would be much appreciated

Thanks

Hello,

I'm a bit of a newbie with Excel, but...

I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.

If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.

Thanks.

Hello

I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.

I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.

When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.

I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.

Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.

There's about 50+ cells that need referencing and I got to get this done for work.

Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.

Hi all, the title pretty much says it all, I have a form where I am trying to create a button that will pop up a window where the user will browse to the desired folder and once that folder is selected, the path will be copied as a text string into the cell adjacent. My command Button cell is in B3 and the path should be shown in C3.

Can anyone help?

Thanks

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002

Hi All,

Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?

Thanks in advance.
Cheers Kaite

I have a couple of worksheets that have goal seek already performed on 20 target cells (for each worksheet). I did this manually, without a macro (since I'm absolutely horrible at all of this).

Now from what I can tell, I need a code to add to the worksheet module in order to make sure that the goal seek updates itself whenever I change a value in the formula of the target cell.

what IS that code?! I can't understand the codes some people have put up, so I have no idea what to do.

Target Cell: M21:M42
Changing Cells: N21: N42

Hi,

I am looking to change how an active cell is viewed. For instance when you are looking at your spreadsheet you can see the active cell has a thin black border around it. I would like to change the border to a thicker one and change the color to blue or red. I am trying to make it easier to the eye so when you are working on a large spreadsheet it is immediatly apparent where you are to avoid squinting.

If anyone can help me please let me know.