Control Sap With Vba |
Control Sap With Vba - Excel |
|
I want to open sap and launch sap transaction using vba from excel.
Until now I managed only to logon, but i can't open a sap session and launch a transaction. Please, give me some ideeas. Here is the code until now:
Dim sapConn As Object 'Declare connection object
Set sapConn = CreateObject("SAP.Functions") 'Create ActiveX object
'Specify user
sapConn.Connection.user = "xxxxx"
'Then password
sapConn.Connection.Password = "xxxxxx"
'Client
sapConn.Connection.client = "600"
'Target server address
sapConn.Connection.ApplicationServer = "172.19.64.5"
'Language code
sapConn.Connection.Language = "EN"
If sapConn.Connection.logon(0, True) True Then
MsgBox "Cannot Log on to SAP" 'Issue message if cannot logon
Else
MsgBox "Logged on to SAP!"
thank you for your time!
Similar Topics
I have a piece of code called ConvertDates that formats data contained on 6 worksheets. The 6 data sheets all contain a data connection to a website of foreign exchange tables.
What I want is for my code to execute as soon as the data connection refresh has finished.
When I use the statement
Code:
ActiveWorkbook.RefreshAll Application.Run "Project1.xlsm!ConvertDates"
The code executes the macro whilst the refresh is still happening, thereby screwing up my results. I don't really want to use a timed wait, because the refresh speed is going to vary from user to user.
Is there some way I can tell excel to wait till the refresh has finished and then execute the code?
Any help would be hugely appreciated.
Code:
Sub Mail() Dim OutApp As Object Dim OutMail As Object Set OutApp = CreateObject("Outlook.Application") OutApp.Session.Logon Set OutMail = OutApp.CreateItem(0) On Error Resume Next With OutMail .To = "cbelcher@jpfryelaw.com" .CC = "" .BCC = "" .Subject = "Burden Report" .Body = ActiveSheet.Range("A1:D12") .Attachments.Add ("C:\Documents and Settings\cbelcher\Desktop\Burden Report.xls") End With On Error GoTo 0 Set OutMail = Nothing Set OutApp = Nothing Set objMsg = Nothing End Sub
So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.
For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.
I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit
Here is the code I am using:
Sub GoToWebSiteAndPlayAroundNew()
Dim appIE As Object ' InternetExplorer.Application
Dim URL As String
Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "
With appIE
.navigate URL
.Visible = True
Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop
.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "
End With
On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next
x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If
Next
End Sub
Any help is appreciated. Here is an excerpt of the code:
Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR
' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh
I got the below macro which uses IE and open the URLs. I want to create a userform with listbox with radio button and commandbutton on the same which will help me to connect to each url when I select the same in listbox and click on the commandbutton.
Code:
Sub DoBrowse1() Dim ie As Object Set ie = CreateObject("Internetexplorer.Application") ie.Visible = True ie.Navigate "www.google.com" End Sub
Any suggestions..
I need to open a password protected workbook using VBA.
I've tried the code below but I still get prompted for a password.
Code:
Workbooks.Open Filename:="\\HOME\Working\Report.xls" _ , Password:="xxxx"
How do I get it to open automatically???
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
Sub OpenPDF() 'Dim pdf As String On Error Resume Next 'pdf file to open pdf = "K:\PDF\mypdf.pdf" 'open the pdf file ActiveWorkbook.FollowHyperlink pdf End Sub
So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!
The code I'm using is Code:
Sub OpenPDF() Dim pdf As AcroPDDoc Dim strPDF As String Set pdf = CreateObject("AcroExch.PDDoc") 'pdf file to open strPDF = "K:\PDF\mypdf.pdf" 'open the pdf file pdf.Open strPDF End Sub
Any ideas what could be wrong with either approach?
Thank-you
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
I have the following code:
Code:
Sub Development() Pass = InputBox("Please enter development password", "Password") If Pass = "XYZ" Then UnhideAll Else: MsgBox ("Password incorrect, please try again") End If End Sub
This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.
Help!
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
I have an excel file that is password protected. I have opened it as read-only.. Is there any way to unlock it & do it modifiable when I already opened it as read only (of course without having to close it & re-open it and enter password lol)
Thanks,
I have the following:
1. Login form containing username and password fields.
2. Data entry form
I want to do the following:
1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".
Thanks in anticipation.
I am using below code to Select the Visible rows in the target range:
Code:
Range("A:p").SpecialCells(xlCellTypeVisible).Select
Problems in this code a
1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.
2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.
E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6
3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.
Some one please revert with the solution.
Thanks in advance.
would like to be able to use, but it is password protected and no one has the
password. Is there a way to copy or save it as a different file that will
not copy the password protection? It would save me a couple days of work if
it is possible.
Thanks
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks