Converting Figure Into Millions/billions/trillions 
Full Excel VBA Course  Beginner to Expert (35% Discount)
Converting Figure Into Millions/billions/trillions  Excel 

Hi,
I have a figure 4,929,524,832 in excel. I want excel to automatically covert this figure into millions/billions/trillions. I tried through 'format cells' but there was no option for this.
Any help?
Roy
I have a figure 4,929,524,832 in excel. I want excel to automatically covert this figure into millions/billions/trillions. I tried through 'format cells' but there was no option for this.
Any help?
Roy
Similar Topics
This may be less of an Excel question than a general data display question, but I'll try here.
I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.
Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.
Thanks,
Dave
I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.
Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.
Thanks,
Dave
I am using below code, but it only untill 19,999. Amount from 20,000 and above only show thousand? Please help!
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12  FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12  FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
Hello 
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
HELP!!
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7  I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7  I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
Right now I have a sports league with 8 teams, I'd like to create a random 7game schedule where each team plays the other team only once. Essentially this will be a 7game round robin. However, I'd like to be able to use this for any number of teams and games.
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
I'd like to do this in Excel, but I can't figure out how to have a randomly generating nonrepeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excelprog...mnumbers.html
Thanks all!
I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)
My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).
Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)
My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).
Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped
On my calculator, if I divide 462,534.05 by 335 I get 1,380.70. Then if I times 1,380.70 by 335 I get 462,534.50. Which is what I need it to be because I need to calculate the difference of a figure not dividing equally.
On excel, if I divide 462,534.05 by 335 I get 1,380.70. Then if I times 1,380.70 by 335 I get the SAME result of 462,534.05.
I have to account for the difference of not dividing equally so there is some format or accounting function that's preset that I don't want but I have no idea how to fix it or format my excel sheet to calculate as my calculator would.
Please can someone help? Thanks!
On excel, if I divide 462,534.05 by 335 I get 1,380.70. Then if I times 1,380.70 by 335 I get the SAME result of 462,534.05.
I have to account for the difference of not dividing equally so there is some format or accounting function that's preset that I don't want but I have no idea how to fix it or format my excel sheet to calculate as my calculator would.
Please can someone help? Thanks!
Hi all 
Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.
Cell Value = "birds"
Example  I need to filter every row so that I see every row that CONTAINS "birds" in the characterstring, not just the row that = "birds".
a) is this possible?
If not, I'd like to know also so I can stop attempting to guess (;
Thanks!!!
Matt
Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.
Cell Value = "birds"
Example  I need to filter every row so that I see every row that CONTAINS "birds" in the characterstring, not just the row that = "birds".
a) is this possible?
If not, I'd like to know also so I can stop attempting to guess (;
Thanks!!!
Matt
Hi, I'm trying to get some macros to combine data from two open workbooks, and I can't figure out the commands to switch from the active workbook to the other open workbook and back. I'm new to VBA and just learning the ropes. All I can figure out is how to switch to another workbook with an exact name. If I record the macro to go to a recent file, for example Window > 1 (filename), the code that I get in VBA is Windows("filename").Activate. This doesn't translate to when I have two different workbooks with different filenames open.
Make sense? I'm a bit confused myself. Maybe just a list of basic workbookswitching techniques or commands would be useful.
 Michael
Make sense? I'm a bit confused myself. Maybe just a list of basic workbookswitching techniques or commands would be useful.
 Michael
I was wondering if anyone could help me out please?!?!
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??
Example:
Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.
I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...
P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...
I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps
Aric
I am attempting to figure out how to change the formula to automatically subtract a 30 minute lunch if the total time for the day exceeds 6 hours worked.
B value Time of day punch in: 9:30 AM
C value =IF(D11="","","")
D value Time of Day punch out: 6:00 PM
E value =IF(D11="","",IF(D11
B value Time of day punch in: 9:30 AM
C value =IF(D11="","","")
D value Time of Day punch out: 6:00 PM
E value =IF(D11="","",IF(D11
Is there a formula for converting hours & minutes to fractions.
Eg.
Converting 1h 15min (1:15) to 1.25
Eg.
Converting 1h 15min (1:15) to 1.25
I see a formula that our Human Resources Department is using to annualize voluntary turnover.
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
i've been trying to figure this out on my own but seem to be hitting road blocks.
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
I know this question has been asked a bajillion times, so I apologize for the redundancy.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the longchain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the longchain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
Hi everyone, this is my first post here. I consider myself a more advanced Excel user and can navigate my way around fairly well. I've written a spreadsheet and am wondering if there is a way to permit data entry in a cell, contingent upon another cell being populated.
In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.
Can anyone help with this, because I can't figure it out....
In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.
Can anyone help with this, because I can't figure it out....
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am creating a data sheet to be completed by other users. I would like to
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.
UPPER function cannot make cell look at itself and perform the function
Excel 2003
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.
UPPER function cannot make cell look at itself and perform the function
Excel 2003
Hi All,
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
I've been poking around trying to figure this out but can't. The time of 9 hours, 15 minutes is being returned from a calculation but I want the cell to display the 9.25 hours instead. This seems like something simple on the surface, but apparently it's not. Any help would be appreciated!