Charts  Dynamically Adjust Min & Max Scale ?? 
Charts  Dynamically Adjust Min & Max Scale ??  Excel 

Regarding Charts in Excel:
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data  month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data  month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
Similar Topics
I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!
I have a workbook that has recently changed on me and is causing a lot of grief. I have a lot of named ranges that the scope of the named range has changed to a new sheet. This is creating a lot of problems! Is there any way to manually change the scope of a named range? without deleting the nmaed range and recreating it?
Hi all,
I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from 100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:
I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from 100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:
Hey
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
Hi
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am trying to calculate time based off a nonconventional quarter hour time system
example;
8:00 to 8:07 = 8.0 hrs
8:08 to 8:23 = 8.25 hrs
8:24 to 8:38 = 8.5 hrs
8:39 to 8:53 = 8.75 hrs
8:53 to 8:59 = 9.0 hrs
I am having trouble writing an equation that would sum the clockin and clockout times (2 per day) and display the total time in these quarter hours and adding an additional hour if it is >= to *:53. Any help would be great.
example;
8:00 to 8:07 = 8.0 hrs
8:08 to 8:23 = 8.25 hrs
8:24 to 8:38 = 8.5 hrs
8:39 to 8:53 = 8.75 hrs
8:53 to 8:59 = 9.0 hrs
I am having trouble writing an equation that would sum the clockin and clockout times (2 per day) and display the total time in these quarter hours and adding an additional hour if it is >= to *:53. Any help would be great.
Hello,
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
This may be less of an Excel question than a general data display question, but I'll try here.
I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.
Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.
Thanks,
Dave
I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.
Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.
Thanks,
Dave
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I have workbook in which I want to save a specific worksheet to a new file with only the values saved  all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
So I've got some data, which has the approximate form of a sine function. I want to find all the xaxis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the xintercept. Any help would be greatly appreciated.
Hey everyone,
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
I am trying to sum all numbers <0 using the SUMIF formula in Excel 2003.
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
Hello,
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Hi,
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
I'm trying to separate bars inside a bar chart into separate groups. Adjust the gap applies to all bars. How will I be able to achieve what I need? Please help and thanks
Hello, what I would like to do is take a portion of a sheet..... So the cells I want to mirror are in the proposal sheet cells B32 x F51. And then mirror the exact duplicate copy to another sheet. The other sheet should have those same values at A20 X G39. What I am trying to do is have a sheet that has skus, prices, and so forth and then when I add,delete, merge, color, or do anything to the cell on the "proposal creation" sheet I want it to mirror only a specific cells to another sheet that is "salesman copy" that we will print to clients. So this way ont he proposal copy a salesman can insert rows or even change the color of the cells and then have it mirror exactly the same on the "salesman copy" which is what we will print for clients. Thank you.
I am trying to work out how to calculate the geometric mean of a series of values, some of which are negative, ie. investment returns over a series of years with some negatives.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.
Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (misspellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've misremembered how this control works, or if there is a setting I can't find.
My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.
Thanks!
T
My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.
Thanks!
T