Vba To Send Messages From Excel Using Kakaotalk Pc And Mightytext

I would like to send an Excel file with hyperlinks of photo's attached to cells but when it is sent the recieving person cannot access the hyperlinks anymore. I am using 2007, I have tried to send the folder but that didn't seem to work. Any other way around this?

Hi,

I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?

I am ready to pay a cost per SMS if necessary.

(I asked the same question at another Excel forum without getting any reply.)

I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.

Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:

using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.

The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.

Anyone have any idea?

Cheers
Jon

Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe

I was testing the following methods (suggested in another thread) to disable copy/paste on a particular worksheet -- now copy and paste is disabled entirely from Excel and, apparently, from each and every excel workbook I've got. HELP!!!!!

http://www.xcelfiles.com/VBA_Quick13.html

http://www.mrexcel.com/archive2/75500/87639.htm



Taxstar

I can't find this solutions anywhere. I know how to send emails from Excel using VBA. When I get to the Body section, I want to insert a clickable link to a website, and also a clickable link to send an email (not as important as the website). Can this be done? I have found code to insert links to files, but none for website links.

I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA

I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

Can I create a message box that displays a message when the spreadsheet is first opened?

If so, where do I put it?

Ok, guys, new to this forum and I need some help with a business invoice. I know how to create a drop down list. But what I want to do is create a Drop-Down list with customers names, say cell A11. After selecting a customer name from the list, It would be able to populate the address in cells A12 and A13. Is this possible?

Right now I have a sports league with 8 teams, I'd like to create a random 7-game schedule where each team plays the other team only once. Essentially this will be a 7-game round robin. However, I'd like to be able to use this for any number of teams and games.

I'd like to do this in Excel, but I can't figure out how to have a randomly generating non-repeating macro with text values in cells.

So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.

I've found this thread that has one for numbers, but I can't figure out how to do it for text values...

http://www.excelforum.com/excel-prog...m-numbers.html

Thanks all!

Hi everyone....this is my first post here ....and not my last I believe!

My question I believe is easily solvable for you cracks of excel.
I have a worksheet with a list of rows (item#, date, price, etc). In the last column of this list I can put an x for some of the items.
On another worksheet or sheet, I need to autoamtically have a list of the items in the first list above, that have an X in the last columns.
I created an example on a worksheet attached just for you to understand.
I apreciate all the help I can get.
Thank you so much.
RG

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

In my Excel spreadsheet I have a column to store the email addresses of my clients. Every time I click on the text of an email address, it automatically opens Outlook with a new message composed to that address. How do I stop this from happening? I don't even use Outlook for my email and this is really frustrating. I've tried changing the format of the column to no avail.

Thank you; your help is most appreciated.