Finding The Coordinates Of The Maximum Point On A Graph

I want to add data points to the scatter plot that are not part of the data
ie. add points to find their concentration on a standard curve.

I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!

i've been trying to figure this out on my own but seem to be hitting road blocks.

i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.

would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.

thank you!

This may be less of an Excel question than a general data display question, but I'll try here.

I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.

Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.

Thanks,

Dave

Hello,

Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...

I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)

Please find it attached.

What i need it to do:

Copy all of the info from the main page to the guest lit (a new row each time).

From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.

Finaly is there a way to check for availabilty on any given date?

if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!

Best Regards,

Jamie

P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)

http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site

http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website

Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (mis-spellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've mis-remembered how this control works, or if there is a setting I can't find.

My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.

Thanks!

T

So I've got some data, which has the approximate form of a sine function. I want to find all the x-axis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).

I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).

Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.

Hi there,

I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!

In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:

=Sheet1!A3 (or whichever cell it is)

That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).

If anyone could point me in the right direction, I'd be very very grateful. Thanks.

I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks

Ok, I'm going to try and explain this. I am going to have 5 data points in cells such as A2:A6

All I need is to know if there is an upward trend or downward trend of the numbers.... I can't have something that simply takes the first and last number and checks if it's higher or lower. I need to actually see if they are trending upwards. Also how would i go about making it so that if they are trending upwards it shows an up arrow, and down arrow for downwards...

And finally, if the trend continues at the same rate, how long it will take the number to reach a goal. Each data point will be 1 week apart, with an ultimate goal needed to be achieved at the end.
This will be a completely separate formula on the sheet....

Any help?

Hi all,

I have written some code that when a button is selected will Refresh a Data Query Table and all of it's information. However, I seem to be getting issues, can some one point me in the right direction with the code?

Code:

 
.Sheets("Sheet 1").ListObject.QueryTable.Refresh BackgroundQuery:=False

When I recorded myslef doing this process it looked like this:

Code:

 
Sheets("Sheet 1").Select
Range("D70872").Select
Selection.ListObject.QueryTable.Refresh BackgroundQuery:=False

Many thanks!

I have a sheet with a list of names on and I've noticed that when I use ctrl+F to use the find function, even when I know i have entered the correct name it still will not work. I have identifed times when I know the name is there on the sheet, but the find function says "Excel cannot find the data you are searching for"

Im unable to put any pics up as my work pc has java disable so photobucket ect won't work but has anyone else come across this problem and how did you rectify it? A search macro perhaps?

Hey everyone,

I'm really hoping someone can help me with this...

I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?

Hello.

I have two huge excel files, with many rows and columns, they "should" look the same.

But I need to find out if anything has been added or removed from the second one compared to the first one.

Which is the easiest way to accomplish this?

Searched this forum and Google but couldn't find what i was looking for.

Thanks in advance!