Highlight Cells Depending On In/out Of Tolerance Conditions |
Highlight Cells Depending On In/out Of Tolerance Conditions - Excel |
|
Similar Topics
Mike
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
I have a dillemma here,
I have to create a schedule which incorporates lunches automatically (either half hour or 1-hour lunches, depending on the circumstances).
The schedule only has time in and time out, but I need excel to automatically deduct the lunch break depending on the circumstance:
If you worked less than 6 hours = no lunch
If you worked more than 6 hours, but less than or equal to 8 hours = 0.5 hour lunch
If you worked more than 8 hours = 1 hour lunch
I am assuming the formula for this will be really long, but I have looked online everywhere and have not found ONE formula for it. I can't put lunch breaks seperately, so all I have to work with is Time in/out.
Also, I wouldn't be able to use military time, so I don't know how excel can assume that time in is in the morning, and time out is in teh evening and/or half-day.
If someone can help it would be greatlyyyy appreciated
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
Need help to generate Series of Items in different Permuation & Combinations..
For Ex:- If there are three Items.. A B C and forming a group of 2
then the the total no of combinations would be permut(3,1) = 6...
I need this to be shown as follows depending on the no of itmes and no of group no=2 in this case...
Permuations & Combinations are as follows:
AB
AC
BC
CA
CB
BA
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.
The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.
Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.
Thanks for any advice,
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!
I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.
Is this possible in Microsoft Exec 2000
Any suggestions would be fantastic!
thanks
The call times are in the custom format h:mm, although it could easily be changed to an Excel time format. I'm using Excel 2002. I want the cell to have a different fill color if it falls within particular time frames.
Example: If the call came in between 22:00 and 23:59 color is light green.
If the call came in between 23:59 and 08:00 the color is yellow.
Example spreadsheet is attached.
Thanks in advance.
From the Excel main menu:
<data><group and outline><settings>
Uncheck: Summary rows below detail
Does that help?
***********
Regards,
Ron
XL2002, WinXP
"JMSprout" wrote:
> When you highlight rows, go to Data, then Group or Outline, then Group, it
> creates a nice plus/minus expand/collapse box for that group, only when the
> group is expanded the button to collapse it is at the bottom row of the
> group. Is there a way to get this button located at the top row of the group?
I need to insert 5 blank rows repeatedly between every existing data rows
for approximately 300 rows.
If I go about doing the repeat short-cut "Control+Y", it just repeats
inserting ONE row only between the consecutive data row.
Is there some command, which helps me highlight all the rows & allows me to
insert 5 blank rows between every consecutive existing data row?
Thanks in advance for your kind advice.
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
e.g.
=A1
=A2
=A3
to
=$A$1
=$A$2
=$A$3
Thanks
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz