Spreadsheet Prints So Small Even With Large Font

Hey guys,

I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -

Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub

The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!

Hi,

I am looking to change how an active cell is viewed. For instance when you are looking at your spreadsheet you can see the active cell has a thin black border around it. I would like to change the border to a thicker one and change the color to blue or red. I am trying to make it easier to the eye so when you are working on a large spreadsheet it is immediatly apparent where you are to avoid squinting.

If anyone can help me please let me know.

A previous poster explained what I also need; there were no responses,
so I thought I would try again.

Does anyone know of an Excel template--or a small stand-alone
program--that will calculate the interest/principal breakdown when
payments are varied in amount and frequency? Free or low-cost, please.
I need one that will work on my Mac/Office 2004. I will need to print
out periodic reports.

Here is the way the previous poster described it:
"Excel template: Loan Amortization for random/irregular payments,
figures days
between payment dates.
I have a loan with a variable beginning balance and irregular payments
with
annual large payment. (based on collections)
Would like to enter payment and date.
then Excel would figure days since last payment, interest amount,
principal
amount, Ending Principal balance.
And total interest paid, total pricipal paid
If I change the starting principal, excel would recalculate all
entries."

Thanks very much.

Here's my formula... =SUM(S7)-T5

If that number is less than -100, I want it to show as blank.

Any help?

Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.


Thanks.

I have a large spreadsheet in Excel 2007. I am converting it to a .csv file to import in to another program. I need to delete all commas from all data.

When I try to replace all commas (with nothing or with another character), I get the error message "The formula you typed contains an error."

I have tried various formats (text, general, etc.) and various file types (.xls,.xlsx, .csv) and still get the same error.

I'm trying to have separate column widths in the same column, based on the rows.

the top half of my spreadsheet are assumptions, formatted with the corrects widths needed, but then below I have calculations and such that I do not want the same widths for. how can I lock in the top part so I can decrease the column widths for the bottom half of my spreadsheet?

hope this makes sense.

when I type a number or letter into a cell and then press enter the cursor
jumps way down the page to what appears to be a random cell. The one i
originaly typed in remains blank. spreadsheet was previously ok this has
just started to happen.

help please
thanks

Hi folks,

My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).

I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .

Do any of you know how to make it so Tab goes back to just moving one cell to the right again?

Thanks in advanced.

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

I'm using some basic code below in an on Workbook Open event to format cells with a value less then 2 and less than 1 with a particular color.

The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!

Code:

 
Dim myRange As Range
Dim cell As Range
Set myRange = Range("V6:V50000")
    For Each cell In myRange
    If cell.Value < 2 Then cell.Font.ColorIndex = 5
    If cell.Value < 1 Then cell.Font.ColorIndex = 3
    Next

I run a small business. I want to start keeping track of inventory using a barcode system.

I know Excel "ok", but I don't know programming.'

I'd like to be able to do something very simple (for now)...

For example...if I had PRODUCT / CODE / INV VALUE

A - CODE A - 5
B - CODE B - 11
C - CODE C - 14

I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1

...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:

A - CODE A - 5

I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:

A - CODE A - 6

Does that make sense? How might I go about doing that?

I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5

And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.

Any help?

If you change Excel to Full Screen View and your taskbar is always on top (as
it normally is), the bottom of the spreadsheet is hidden behind the taskbar.
Does anyone know how to get around this without hiding the taskbar? I have
found that if I drag the taskbar to the bottom and then back up again, the
Excel window resizes itself correctly and the bottom of the spreadsheet is
visible again. Problem is, I want to do this from VBA! Can anyone help
please???

Sorry for the question. Normally I find answers to my excel questions by going through the help tab or by searching on Google. However, I don't even know what question to ask on this one!?!

Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?

In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.

Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug

Can I create a message box that displays a message when the spreadsheet is first opened?

If so, where do I put it?