Split Panes Vertical Scroll Bar |
Split Panes Vertical Scroll Bar - Excel |
|
1. Can a VERTICAL scroll bar be added to the right side the left pane so that each pane can independently be scrolled up and down without the other pane scrolling simultaneously?
1. Is there a way to remove these HORIZONTAL scroll bars on the bottom?
Thanks! (My first post...)
Similar Topics
In excel i have a sheet open with about 30 columns in it. I try to use the scroll bar to move to the right and nothing happens apart from the scroll bar moves along. If i use the right button on the keyboard the scroll bar moves but i cannot see the columns I want. I cannot see anything that would of caused this.
Can anyone help?
Thanks
When I create a bar chart, the bars are horizontal. I want the chart bars to be vertical. It tried to rotate the chart so that it is vertical, but the "rotate" options are greyed out.
How do I get those bars vertical?
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
Cheers,
Doug
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?
Instead of the y axis being on the left hand side, i wish for it to cut at 0,0. I have positive and negative values and I need it to be in the centre instead of on the left.
I have tried formatting both the axis and it would appear that the x axis already cuts the y axis in the right posistion so i need to format the x axis to make the y axis cut it at 0,0. I have already tried typing in 0 instead of 1 and it keeps saying it need to be number more than or equal to 1.
Any help would be greatly appreciated.
Nicole
I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.
Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.
Thanks.
it normally is), the bottom of the spreadsheet is hidden behind the taskbar.
Does anyone know how to get around this without hiding the taskbar? I have
found that if I drag the taskbar to the bottom and then back up again, the
Excel window resizes itself correctly and the bottom of the spreadsheet is
visible again. Problem is, I want to do this from VBA! Can anyone help
please???
include/exclude one of the series to see how the chart changes, all the
colors change and we have to spend time re-identifying which series is
which, using the legend to check the colors.
Is there a way to "lock" the colors, so that the bars stay the same colors
regardless of whether other bars are included/excluded?
Thanks!
Keith
I'm trying to extract all the text in a cell which is on the right side of a comma (,)
Currently I am using this formula,
=RIGHT(C1,FIND(",",C1)-1)
However it sometimes is missing some of the data after the , and sometimes pulling a few characters before the ,
any suggestions on how to correct my formula please?
Thanks in advance.
My excel file will contain more than one tab.
I have to free the first two lines in all the tabs except the first one.
I tried the following code.
Code:
xlsobj.Worksheets(1).Rows("1:2").Select ActiveWindow.FreezePanes = True
But in this I have to change the Active Worksheets in VBA, Which I want to avoid.
Is there any method to achieve this without selecting the cells.
Something like
Code:
xlsobj.Worksheets(1).Rows("1:2").FreezePanes = True
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
I want to split the lines into multiple rows.Each line should come in a different row.
I want to do this using macro.Is there is anyway to do this?
There is an option to split the cell into multiple cells on the basis of the delimiter, but there is no option to split them into rows.
Probably a simple little function, help would be appreciated!
I'd like to take a number entered into one cell ie. A1 = 20
and split it randomly but evenly over 3 other cells ie.
B1=6
C1=8
D1=6
Number should be whole and no zeros?
Thanks all!
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top
Cheers Jim