Set Column Width In Pixels |
Set Column Width In Pixels - Excel |
|
Greetings Board,
XL 2003, Windows XL Pro
I'm working on a database project and need to match it to an existing XL sheet.
Is there any way to default XL to work with column widths (and row heights) in pixels.
In other words, if I set a width to 10, I would want it to set to 10 pixels. I know the screen will show me the pixel count if I drag and drop, but I want to be able to set the widths and heights.
Thank you.
XL 2003, Windows XL Pro
I'm working on a database project and need to match it to an existing XL sheet.
Is there any way to default XL to work with column widths (and row heights) in pixels.
In other words, if I set a width to 10, I would want it to set to 10 pixels. I know the screen will show me the pixel count if I drag and drop, but I want to be able to set the widths and heights.
Thank you.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
I'm trying to have separate column widths in the same column, based on the rows.
the top half of my spreadsheet are assumptions, formatted with the corrects widths needed, but then below I have calculations and such that I do not want the same widths for. how can I lock in the top part so I can decrease the column widths for the bottom half of my spreadsheet?
hope this makes sense.
the top half of my spreadsheet are assumptions, formatted with the corrects widths needed, but then below I have calculations and such that I do not want the same widths for. how can I lock in the top part so I can decrease the column widths for the bottom half of my spreadsheet?
hope this makes sense.
I'm trying to freeze the widths of columns so that when users of the
worksheet are using it, they can't change the width. It's for editors who
write headlines for specific areas that can only be as long as the column is
wide or the text won't fit.
worksheet are using it, they can't change the width. It's for editors who
write headlines for specific areas that can only be as long as the column is
wide or the text won't fit.
This is probably an easy question for most of you, but it's killing me. I tried searching before I posted this, but the suggestions given didn't seem to work for me.
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.
Hi All,
If I drag a formula to the right it adapts the column letter in the formula from A to column B, which is standard Excel functionality.
However, if I drag the formula to the right I want Excel to skip a column each time.
In other words:
=A1 ; = B1 ; = C1
Should be
=A1 ; = C1 ; = E1 etc...
Is there an easy trick to do this?
Thanks,
Michiel
If I drag a formula to the right it adapts the column letter in the formula from A to column B, which is standard Excel functionality.
However, if I drag the formula to the right I want Excel to skip a column each time.
In other words:
=A1 ; = B1 ; = C1
Should be
=A1 ; = C1 ; = E1 etc...
Is there an easy trick to do this?
Thanks,
Michiel
Hi all.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select
Range("A1:N18").Select
ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
Hello,
As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).
Code:
I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.
Please help
Thanks!
As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).
Code:
Sub AddImage()
Dim strPath As String
Dim strFile As String
Dim Picture As Object
Dim Response As String
Dim C As Range
strPath = "C:\\Photos\"
For Each C In Range("A1", Range("A65536").End(xlUp))
If C 0 Then
With C.Offset(0, 1)
Set Picture = Nothing
On Error Resume Next
Set Picture = Sheets("Raw Pix").Pictures.Insert(strPath & C.Value & ".jpg")
Picture.Top = .Top
Picture.Left = .Left
Picture.LockAspectRatio = msoTrue
Picture.Width = 157
Picture.Height = 138
End With
End If
NextC:
Next C
End Sub
I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.
Please help
Thanks!
I am using below code, but it only untill 19,999. Amount from 20,000 and above only show thousand? Please help!
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
Let's say, if two fields in one column has been filled with numerical
increament, i.e. A1 is 2 and A2 is 4. Now I want to fill the whole column
with this increament pattern till row A20. One thing we will all do is to
left click on the fill handle and drag it down to row A20. But if the task is
to fill to row 500, the mouse draging sometime won't be easy to locate the
row. I am wondering anyone can help me to find the keyboard shortcut
equivalent to that drag fill handle action.
Thanks
increament, i.e. A1 is 2 and A2 is 4. Now I want to fill the whole column
with this increament pattern till row A20. One thing we will all do is to
left click on the fill handle and drag it down to row A20. But if the task is
to fill to row 500, the mouse draging sometime won't be easy to locate the
row. I am wondering anyone can help me to find the keyboard shortcut
equivalent to that drag fill handle action.
Thanks
I have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times. Is there an easy way to do this?
Thanks in advance.
Thanks in advance.
I have a long list of item descriptions that I need to filter down to descriptions containing words like "valve" or "ring" or "root" or "epic" (17 key words in all). The basic custom filter looks like it only lets me filter for 2 words.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
Hello, I'm trying to count the number of times a name appears across multiple worksheets but I can't seem to figure it out.
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
Hello,
I want to protect a cell that I have a drop down list in, but I still want the drop down list to work.
When I try to protect it, the user is not able to use the drop down list to select other items. I didn't see an option on the protect sheet area.
Thanks for any help.
Nick
I want to protect a cell that I have a drop down list in, but I still want the drop down list to work.
When I try to protect it, the user is not able to use the drop down list to select other items. I didn't see an option on the protect sheet area.
Thanks for any help.
Nick
Hi! I am new to Excel and I am creating fillable forms in excel which are protected so that users canonly input data in certain cells. I am using Excel 2003. The users told me that they do not want text to go beyond the edge of the page when they are inputting data. They also want the words to wrap when they reach the end of the sentence. I am also using check boxes(yes/no) and Ifind it difficult to make the adjacent cells fillable only Thanks for your help and correct me if I am wrong as I am new to this board.
Hi there,
I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!
In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:
=Sheet1!A3 (or whichever cell it is)
That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).
If anyone could point me in the right direction, I'd be very very grateful. Thanks.
I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!
In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:
=Sheet1!A3 (or whichever cell it is)
That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).
If anyone could point me in the right direction, I'd be very very grateful. Thanks.
Hi Excel experts,
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.
Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.
Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.
Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.
Can anyone assist?
Thanks!
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.
Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.
Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.
Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.
Can anyone assist?
Thanks!
If you change Excel to Full Screen View and your taskbar is always on top (as
it normally is), the bottom of the spreadsheet is hidden behind the taskbar.
Does anyone know how to get around this without hiding the taskbar? I have
found that if I drag the taskbar to the bottom and then back up again, the
Excel window resizes itself correctly and the bottom of the spreadsheet is
visible again. Problem is, I want to do this from VBA! Can anyone help
please???
it normally is), the bottom of the spreadsheet is hidden behind the taskbar.
Does anyone know how to get around this without hiding the taskbar? I have
found that if I drag the taskbar to the bottom and then back up again, the
Excel window resizes itself correctly and the bottom of the spreadsheet is
visible again. Problem is, I want to do this from VBA! Can anyone help
please???
I want to make a searchable drop down menu. In other words if I click on it and press "D" I want to see the instances that begins with a D.
How do I do this?
How do I do this?
Is there an Excel guru that can help with this - its related to "drop down menus"
I have 2 colombs of data.
AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.
At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1
The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.
How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...
ANy suggestions??
I have 2 colombs of data.
AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.
At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1
The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.
How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...
ANy suggestions??
I have two columns in my spreadsheet. Column A has no blank fields, Column B has some blank fields. I would like to show the text from Column A in the same row of Column B only when Column B is blank.
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
I'm trying to format a worksheet to show how many days overdue certain tasks are, and running into a couple of issues. The sheet is set up with Due Dates in Column A, Days Overdue in Column B, and Date Completed in Column C. My first thought was just to use as simple a formula as possible in Column B =Today()-A2. This worked alright for tasks that already had Due Dates assigned, but if Column A was blank I'd get a high number in Column B. I also realized that tasks will continue to show as overdue even after I enter the completed-on date in Column C. Is there a relatively simple way to tackle this formula? Thanks in advance for suggestions. (I've attached an example with the column headings I want to use.)