Sort Rows With Certain Criteria To Various Worksheets |
Sort Rows With Certain Criteria To Various Worksheets - Excel |
|
I have a worksheet that we'll call "Main". I this worksheet, there are 12 columns.
Of those 12 columns, A thru L, I need to separate them out into separate based on 20 distinct values that can appear (multiple times or none at all for each value) in column B. (Note: If it would make it easier, I can re-arrange to make Column A the column with the criteria to sort these by. It would be a pain, but I can do it.)
Based on what is in Column B, I need the workbook to be sorted into the distinct subset workbooks, pulling only columns B, C, and G from the original. (The rest of the columns are used elsewhere in the workbook for calculations, so I need them to stay in the "Main" sheet, but I don't need them in the subset workbooks.
I further need it to not only sort these into individual workbooks based on column B, but also to only grab those rows that have a set value ("2" in my workbook) in column J...even though column J is not itself one that needs to be copied over...it's only a criteria determining what is copied.
Can this be done? I know I can do it with a combination of If statement and Vlookup, but if I do it that way, then any rows that don't qualify to be sorted into a particular workbook instead show up blank, so my data comes out with blank row, blank row, blank row, row with data (it qualifed with the if/vlookup), blank row, blank row, data row, etc.
My "Main" sheet usually has somewhere around 1,000 rows, and I have 20 different sheets to sort it into. I have to do this weekly, so I'm not inclined to sort/filter/copy/paste every time I need the report published.
Any help will be greatly appreciated.
I can't post an example because I don't have the necessary permissions to install anything (including the program to display worksheets) onto my computer. I can send you an example if you'd like, as I know that's an incredibly complicated question...and more complicated with no example.
Thanks!
Calinda
Of those 12 columns, A thru L, I need to separate them out into separate based on 20 distinct values that can appear (multiple times or none at all for each value) in column B. (Note: If it would make it easier, I can re-arrange to make Column A the column with the criteria to sort these by. It would be a pain, but I can do it.)
Based on what is in Column B, I need the workbook to be sorted into the distinct subset workbooks, pulling only columns B, C, and G from the original. (The rest of the columns are used elsewhere in the workbook for calculations, so I need them to stay in the "Main" sheet, but I don't need them in the subset workbooks.
I further need it to not only sort these into individual workbooks based on column B, but also to only grab those rows that have a set value ("2" in my workbook) in column J...even though column J is not itself one that needs to be copied over...it's only a criteria determining what is copied.
Can this be done? I know I can do it with a combination of If statement and Vlookup, but if I do it that way, then any rows that don't qualify to be sorted into a particular workbook instead show up blank, so my data comes out with blank row, blank row, blank row, row with data (it qualifed with the if/vlookup), blank row, blank row, data row, etc.
My "Main" sheet usually has somewhere around 1,000 rows, and I have 20 different sheets to sort it into. I have to do this weekly, so I'm not inclined to sort/filter/copy/paste every time I need the report published.
Any help will be greatly appreciated.
I can't post an example because I don't have the necessary permissions to install anything (including the program to display worksheets) onto my computer. I can send you an example if you'd like, as I know that's an incredibly complicated question...and more complicated with no example.
Thanks!
Calinda
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi!
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
How do I sort but have the other data move with the column I'm sorting? Whenever I sort, for example, by name, the address and phone numbers columns stay the same and are therefore incorrect with the newly sorted columns. I've looked everywhere.
Good mornng - I am new to the forum - my name is Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
I have two columns in my spreadsheet. Column A has no blank fields, Column B has some blank fields. I would like to show the text from Column A in the same row of Column B only when Column B is blank.
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
This is my first post in these forums.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.
Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.
Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).
There will be a varying number of rows in each of the individual sheets.
If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
If anyone can help it would really cut down the time I spend collating these stats every day!
Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.
Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).
There will be a varying number of rows in each of the individual sheets.
If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
If anyone can help it would really cut down the time I spend collating these stats every day!
I have a formula in cell C1 (=A1/B1). I want to copy this formula down to row C20, however rows A2 to A20 are empty so C2 to C20 show (#DIVO!). Is there something I can put in the formula to make column C be blank until the data is enter into Columns A & B?
Good Morning Folk
Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top
Cheers Jim
Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top
Cheers Jim
I'm attempting to filter columns E, G, and I all at the same time. I need to
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
Hi peeps
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
Could you guide me please....
I need to insert 5 blank rows repeatedly between every existing data rows
for approximately 300 rows.
If I go about doing the repeat short-cut "Control+Y", it just repeats
inserting ONE row only between the consecutive data row.
Is there some command, which helps me highlight all the rows & allows me to
insert 5 blank rows between every consecutive existing data row?
Thanks in advance for your kind advice.
I need to insert 5 blank rows repeatedly between every existing data rows
for approximately 300 rows.
If I go about doing the repeat short-cut "Control+Y", it just repeats
inserting ONE row only between the consecutive data row.
Is there some command, which helps me highlight all the rows & allows me to
insert 5 blank rows between every consecutive existing data row?
Thanks in advance for your kind advice.
Hello All, I have a column where cells need to be 50 characters long, it contains addresses, however, since all the addresses do not meat the criteria, I need to add (blank spaces) to reach the 50 characters, any idea on how to approach this?
Example
Fire Street #50 this cell contains 17 characters therefore I need to add the rest by adding blank spaces to reach 50 characters, otherwise the system I am exporting the data will not understand this cell
Example
Fire Street #50 this cell contains 17 characters therefore I need to add the rest by adding blank spaces to reach 50 characters, otherwise the system I am exporting the data will not understand this cell
Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?
For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?
I hope this makes sense. Thank you in advance for any help.
For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?
I hope this makes sense. Thank you in advance for any help.
Hi-
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
Hi everyone....this is my first post here ....and not my last I believe!
My question I believe is easily solvable for you cracks of excel.
I have a worksheet with a list of rows (item#, date, price, etc). In the last column of this list I can put an x for some of the items.
On another worksheet or sheet, I need to autoamtically have a list of the items in the first list above, that have an X in the last columns.
I created an example on a worksheet attached just for you to understand.
I apreciate all the help I can get.
Thank you so much.
RG
My question I believe is easily solvable for you cracks of excel.
I have a worksheet with a list of rows (item#, date, price, etc). In the last column of this list I can put an x for some of the items.
On another worksheet or sheet, I need to autoamtically have a list of the items in the first list above, that have an X in the last columns.
I created an example on a worksheet attached just for you to understand.
I apreciate all the help I can get.
Thank you so much.
RG
is it possible to put two formulasinto one cell?
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)
Hello,
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
We have a workbook that does not allow us to use the Move or Copy command. When we right click on the worksheet and select Move or Copy, we are able to check the box to make a copy, but when we click OK nothing happens.
We have checked to make sure that the workbook and worksheet:
1. Are not protected
2. That there are no hidden worksheets
3. That there are not worksheets that exist with the same name
4. That not all the worksheets are selected
There are only two worksheets in this workbook.
Any ideas of why we are unable to make a copy of this worksheet within the same workbook or to another workbook?
We have checked to make sure that the workbook and worksheet:
1. Are not protected
2. That there are no hidden worksheets
3. That there are not worksheets that exist with the same name
4. That not all the worksheets are selected
There are only two worksheets in this workbook.
Any ideas of why we are unable to make a copy of this worksheet within the same workbook or to another workbook?