Copy Cell With Single Apostrophe, "paste As Values" Returns Two Apostrophes?

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?

I have been using Excel (XP) to make a text chart for several months. Some of
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!

I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5

And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.

Any help?

I have two columns in my spreadsheet. Column A has no blank fields, Column B has some blank fields. I would like to show the text from Column A in the same row of Column B only when Column B is blank.

So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.

Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?

I know that you can do PASTE > VALUES in order to keep your conditional formatting on an existing sheet, but sadly the people in my office are prone to not understanding this ("It's a bit technical") and so they just pasting blocks of text from elsewhere and lose it all.....

Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?

Thanks

I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.

Hi,

I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.

Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?

For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.

Fig. 1

1
2
3
4

Fig. 2

1 1
2
3
4 4

Fig. 3
1 1
2 4
3
4

is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)

Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.


James

Hello,

I need to know how to auto-fill text based on text in another cell. For
example:

Every time I enter "CHS" in Column B, I want Charleston to auto-fill in
Column C.
And when I enter "SAN", in Column B, I want San Diego to auto-fill in Column
C.

How can I set up a list like this? Any ideas?

Thanks!

Jason

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

Hi,

I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.

I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.

Code:

Sub Step4()
   On Error Resume Next
   Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub

I'm sure it's something simple... like me !

Any help much appreciated

Wrightie

I'm trying to come up with a solution to calculate the man hours and days worked over multiple sheets.

I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.

The days of the week consists of "Name" "Date" Hours"

The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"

Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.

I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.

I have attached a sample file.

Thanks in advance for your help.

How do I code a custom format to show 0% as a dash? I know how to make it blank, but I don't really want that....my formulas are quite complex already so I'm not sure I want to do it as part of the formula...thanks!

Hi everyone,

I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.

The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.

Thanks for your time!