Error Message Box With Absolutely Nothing In It! |
Error Message Box With Absolutely Nothing In It! - Excel |
|
Talk about terse! I was just running a macro, which I know takes a long time. It finished the main processing, but when it got to the end I got an error message box that was totally blank! No message, no error number, not one character of text, just the red-X symbol you get with MsgBox/vbCritical, an OK button and a Help button. Its title is "Microsoft Visual Basic for Appli..."
Anyone seen this? Anyone know what it means?
BlankError.gif
Similar Topics
I have written a macro and at the end it displays a message "The macro has finished".
I would like this message box to disappear after 2 seconds automatically so that users don't have to press the OK button all the time.
can this happen ?
thanks
andy
When I try to replace all commas (with nothing or with another character), I get the error message "The formula you typed contains an error."
I have tried various formats (text, general, etc.) and various file types (.xls,.xlsx, .csv) and still get the same error.
I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.
Someone has any idea of what could be the problem?
thanks
NA
My Cell C3 is a numeric value.....I have set conditional formatting to
make the text red and bold when the number is equal or less than 10,000
is there a way I can make cell E3 display a message when the C3
condition is true?? or if not a message is there a way to make a
message box pop up when my C3 condition of less then or equal to 10,000
is true?
how would I do something like this?
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
If so, where do I put it?
I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.
I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.
Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.
It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.
I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.
I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.
I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!
Thanks very much for your time.
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
for a search box code provided by Joe Was
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?
I am ready to pay a cost per SMS if necessary.
(I asked the same question at another Excel forum without getting any reply.)
For example, if I have a total of 53 calls and the total talk time is 4:19:05, what would the average talk per call be? I tried doing everything in seconds (this would give me a total of 15545 seconds) but the total I was getting is 4:89.
What would the formula be to get the correct average time?
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)
My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).
Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped
From the Excel main menu:
<data><group and outline><settings>
Uncheck: Summary rows below detail
Does that help?
***********
Regards,
Ron
XL2002, WinXP
"JMSprout" wrote:
> When you highlight rows, go to Data, then Group or Outline, then Group, it
> creates a nice plus/minus expand/collapse box for that group, only when the
> group is expanded the button to collapse it is at the bottom row of the
> group. Is there a way to get this button located at the top row of the group?
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks
Can anyone help?
Thanks
I'm trying to set up a basic formula to clear out unwanted cells. Basically, if the cell is not equal a number, I'd like it to be cleared of any information. I would rather not use a space, because I have text that is overlapping between cells and would like it to be legible.
Here's the basic formula:
=if(A1>0, A1, ???)
Any help would be great. Thanks!