Format A Textbox For A Phone Number |
Format A Textbox For A Phone Number - Excel |
|
I am trying to format a TextBox on a UserForm to display a phone
number in xxx-xxx-xxxx format when I exit the TextBox.
Any help would be appreciated.
TIA
-Minitman
Similar Topics
I have a userform with frames containing textboxes. The user enters a currency value and once they leave the control, then a protected textbox next to it shows the corresponding value in SEK. I started off using the exit event but ran into 2 problems.
If you tabbed out of the last textbox in the frame, the exit event never kicked in (this is documented in other topics but took some time to find). This resulted in me using the exit event for all except the last textbox in the frame that used afterupdate instead I then discovered that the exit events didn't kick in if, instead of tabbing out of the field, I deliberately placed focus in a control elsewhere on the form. Changing the event from exit to afterupdate corrected this. My question then is ... could you guys document in this topic when you would/must use the exit rather than the afterupdate event (or vice-versa).
Thanks
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
The call times are in the custom format h:mm, although it could easily be changed to an Excel time format. I'm using Excel 2002. I want the cell to have a different fill color if it falls within particular time frames.
Example: If the call came in between 22:00 and 23:59 color is light green.
If the call came in between 23:59 and 08:00 the color is yellow.
Example spreadsheet is attached.
Thanks in advance.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
-Shane
Does anyone know a better way to do this?
Thanks in advance!
I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.
It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.
Please can someone give me a bit of guidence or link me to a good rescource if missed it in the search.
Thanks in advance.
G
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"
so in summary,
if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.
Thanks in Advance for the help
Mutley13
Instead of the y axis being on the left hand side, i wish for it to cut at 0,0. I have positive and negative values and I need it to be in the centre instead of on the left.
I have tried formatting both the axis and it would appear that the x axis already cuts the y axis in the right posistion so i need to format the x axis to make the y axis cut it at 0,0. I have already tried typing in 0 instead of 1 and it keeps saying it need to be number more than or equal to 1.
Any help would be greatly appreciated.
Nicole
If any one could give me a solution for this its will be a great help for me.
I am working in a bank and on every day we receive Month to date data of Loans and advances made by every branch with Region wise total and manager wise total. With Sum of loan and count of loan. In our MIS format the in A coulum branches are sorted and listed in a sequence with sub total Region. I have data where if if do the pivot and change the data the out put should be displayed accordingly in the MIS format. Can any one help me how can we do this or is there any other office addins/softwares are available if so the data is changed on a daily basis and if we do the pivot it will automatically copy the data to the MIS format.
Thanks.
24 hour format i.e. 15:00. How can I do this?
I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?
I am ready to pay a cost per SMS if necessary.
(I asked the same question at another Excel forum without getting any reply.)
If that number is less than -100, I want it to show as blank.
Any help?
Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.
Thanks.