Insert A Symbol In To A Formula 
Insert A Symbol In To A Formula  Excel 

Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
Online Excel Courses
Similar Topics
Ok, I'm going to try and explain this. I am going to have 5 data points in cells such as A2:A6
All I need is to know if there is an upward trend or downward trend of the numbers.... I can't have something that simply takes the first and last number and checks if it's higher or lower. I need to actually see if they are trending upwards. Also how would i go about making it so that if they are trending upwards it shows an up arrow, and down arrow for downwards...
And finally, if the trend continues at the same rate, how long it will take the number to reach a goal. Each data point will be 1 week apart, with an ultimate goal needed to be achieved at the end.
This will be a completely separate formula on the sheet....
Any help?
All I need is to know if there is an upward trend or downward trend of the numbers.... I can't have something that simply takes the first and last number and checks if it's higher or lower. I need to actually see if they are trending upwards. Also how would i go about making it so that if they are trending upwards it shows an up arrow, and down arrow for downwards...
And finally, if the trend continues at the same rate, how long it will take the number to reach a goal. Each data point will be 1 week apart, with an ultimate goal needed to be achieved at the end.
This will be a completely separate formula on the sheet....
Any help?
I often use if statements to return empty cells, for example:
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrowdown because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrowdown because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
Hi,
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the lefthand most column. However, all the other columns are filled each with the grey dropdown filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter dropdown buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the lefthand most column. However, all the other columns are filled each with the grey dropdown filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter dropdown buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
is it possible to put two formulasinto one cell?
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a 12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show 12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9C8))OR,IF(C9,ISBLANK,"",SUM(C9C8)
On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a 12 hour answer.
looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show 12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks
=IF(C13=0,","SUM(C9C8))OR,IF(C9,ISBLANK,"",SUM(C9C8)
Hi there! I have a workbook that is having an issue with drop down menu's. When I click in a cell the little drop down arrow appears and when I go to click on the drop down arrow nothing happens. The drop down list does not appear.
BUT.......if I click in the cell and right click and chose "pick from list" the list will then appear.
Why is this happening? Why does the drop down list not appear when I click on the arrow but only work if I chose the "pick from list" ???
I need the drop down arrow to work
BUT.......if I click in the cell and right click and chose "pick from list" the list will then appear.
Why is this happening? Why does the drop down list not appear when I click on the arrow but only work if I chose the "pick from list" ???
I need the drop down arrow to work
This formula is supposed to calculate difference between today and date hired to give years and months of service. Works fine for all except if the person was hired in year 2000 then this formula shows 110 y. Any one know how to fix this? or have a different formula that works.
=DATEDIF(E21,TODAY(),"y")&" y "&DATEDIF(E21,TODAY(),"ym")&" m"
Thanks
Rick
=DATEDIF(E21,TODAY(),"y")&" y "&DATEDIF(E21,TODAY(),"ym")&" m"
Thanks
Rick
How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
I have a coworker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
I am using the following formula to calculate the number of days between a date and the current date: =DATEDIF(A1,TODAY(),"d") What do I add to the formula to leave cell blank if no date is entered in the cell for calculation.
Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" > 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
Hi,
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
Hi Everyone,
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I have searched online and in help but can't seem to find the best solution...
I have values like 00904BB303D6 that need to become: 00:90:4B:B3:03:D6 (the value is always 12 digits, and the : needs to appear every two digits.) Is there a formula that can easily do this for me? Your suggestions are greatly appreciated!
Thanks in advance!!!!
I have a spreadsheet that when I copy the formula, it copies correctly
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
Hi, all  I have been banging my head on the desk over this one...it's gotta be so simple, right? Have searched online, and on Mr. Excel, but still can't get this right.
I need a formula in cell L3 that says "IF cell K3 is greater than 25 but less than 30, K3, otherwise, blank." Cell K3 currently contains the value 30. My formula in L3 currently is =IF(K3>25,K3,IF(K3
I need a formula in cell L3 that says "IF cell K3 is greater than 25 but less than 30, K3, otherwise, blank." Cell K3 currently contains the value 30. My formula in L3 currently is =IF(K3>25,K3,IF(K3
I am trying to sum all numbers <0 using the SUMIF formula in Excel 2003.
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
Hi everyone,
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a dropdown list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a dropdown list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I'm looking for a formula that pulls the text from a cell unti it hits a space.
I'm using the formula below but keep getting #VALUE results
B1: =LEFT(A1,FIND(",",A1,1))
I know it's not that hard but can't figure it out.
thanks for the help
max
I'm using the formula below but keep getting #VALUE results
B1: =LEFT(A1,FIND(",",A1,1))
I know it's not that hard but can't figure it out.
thanks for the help
max
I am trying to write a formula that uses both an if statement and a vlookup statement.
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?