Validating Required Fields In Userform |
Validating Required Fields In Userform - Excel |
|
I have created a userform with around 10 fields. 6 of these fields are required fields. There is a command button on the userform called "Add to List". When this command button is clicked, all the data on the userform is transferred to an spreadsheet in the background. The required fields are listed below in the order as they appear on the userform Date Docket Number Customer Amount Driver Truck Rego Number When I place the cursor on the date field and tab through all the fields, filling in the appropriate data, I then click on the button "Add to List". Everything is transferred to the spreadhsheet.
The issue arise as follows:
I place the cursor with the mouse on the Customer field and fill in the customer and tab through the remaining fields filling in the appropriate data. I then click on the "Add to List" button and it transfers the data to the spreadsheet. The userform is cleared out allowing me to enter the next record. However the fields for Date and Docket Number are blank.
I would like to put in some validation code when the "Add to List" button is clicked, that would come up with a message saying that in this example "Date is blank, please enter a valid date"
I have tried various options but no success. I would also like to avoid getting a "Run Time Error 13" message. I want to end user to only see the user form.
Any help would be appreciated.
Thanks
Similar Topics
I have the AutoOpen code that starts things off, and then, in turn, loads the UserForm with the fields that need to be populated.
I can't figure out how to route the user back to the UserForm, to enter the 'missed' data.
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin
I have the following:
1. Login form containing username and password fields.
2. Data entry form
I want to do the following:
1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".
Thanks in anticipation.
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
This is a very basic question, but i have been struggling for hours, so I must ask.
I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:
Sub Button1_Click() Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange") UserForm1.Show End Sub
I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated
regards
jim
Code:
Private Sub btn1_Click() UserForm1.PrintForm End Sub
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
I was wondering if it is possible to change the color of a command button after it's been clicked?
This is to allow the user to identify which buttons have already been clicked.
Thanks!
I'm thinking there has to be a more automated way to discover the best unique key of existing fields and their data. I thought I'd post this as a challenge because I don't know the "right" (or better) answer.
Anyone have any ideas?
I'm new to macros and would appreciate any help this board can offer. Thanks...
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
Thanks
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
I have a spreadsheet with some cells setup with a drop-down list containing
Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change
back to a blank field I have to invoke the soft keyboard, activate the cell
and hit backspace then close the soft keyboard - quite a long-winded
procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert
back to a blank I can just use the stylus to choose a blank from the chooser
list.
How do I add the option of inputting a blank from the Data Validation List
bearing in mind I am using the Data Validation Source box for entering my
choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
Although not a betting man I would wager there is a simple 'fix' for this
but things are only simple if you know how in the first instance! ;^)
--
Thanks & regards,
-pp-
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
I'm pretty new at VBA and was wondering if you could help me out on this:
I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.
thank you so much and would really appreciate to hear from anyone soon.
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.
Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.
Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.
Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.
Can anyone assist?
Thanks!
For instance,
A B
1 $32.17 8/17/08
2 $43.20 9/12/09
If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.
Thanks