How To Add A Data Validation Input Message In Vba |
How To Add A Data Validation Input Message In Vba - Excel |
|
what i would like to do in VBA is when i select any individual cell to the right of these the name of the car appears as a message (as if i had gone DATA -> VALIDATION -> INPUT MESSAGE -> CARS NAME).
Tried positioning a Userform next to the active cell but when i scroll down the page and select a cell the userform is to far down the screen to be seen.
Alternatively this could be done using comments. Any help would be appreciated.
Similar Topics
pretty straight forward to set a single validation so that a message is
displayed when incorrect data is entered. However, adding another validation
seems to delete the old one. Thanks in advance.
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
My Cell C3 is a numeric value.....I have set conditional formatting to
make the text red and bold when the number is equal or less than 10,000
is there a way I can make cell E3 display a message when the C3
condition is true?? or if not a message is there a way to make a
message box pop up when my C3 condition of less then or equal to 10,000
is true?
how would I do something like this?
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
Help
Cheers,
Doug
If so, where do I put it?
Code:
Private Sub btn1_Click() UserForm1.PrintForm End Sub
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.
Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.
Thanks.
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:
=HYPERLINK(A1, "Goto Link")
The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.
"Cannot open the specified file"
Any thoughts?
Bob
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks
I have a spreadsheet with some cells setup with a drop-down list containing
Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change
back to a blank field I have to invoke the soft keyboard, activate the cell
and hit backspace then close the soft keyboard - quite a long-winded
procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert
back to a blank I can just use the stylus to choose a blank from the chooser
list.
How do I add the option of inputting a blank from the Data Validation List
bearing in mind I am using the Data Validation Source box for entering my
choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
Although not a betting man I would wager there is a simple 'fix' for this
but things are only simple if you know how in the first instance! ;^)
--
Thanks & regards,
-pp-
I have the AutoOpen code that starts things off, and then, in turn, loads the UserForm with the fields that need to be populated.
I can't figure out how to route the user back to the UserForm, to enter the 'missed' data.
I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.
Someone has any idea of what could be the problem?
thanks
NA
I have the following:
1. Login form containing username and password fields.
2. Data entry form
I want to do the following:
1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".
Thanks in anticipation.
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!