Run-time Error 1004: Unable To Get The Vlookup Property Of The Worksheetfunction C

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

Is it possible to share a workbook with macros and have the macros work properly. I have one spreadsheet that needs to be shared by many users. We want to all be in the same document at the same time saving changes. The real catch is that the workbook has macros. I used the 'Share Workbook' function under tools. At the end of the setup, it told me that the macros would not work properly. The odd thing is that everytime I try to click on one of the macros I get an error, but yet the macro still performs the function. So essentially the macro works, it is just a pain because you have to click 'end' everytime on the error screen. Any suggestions?

Alanda

I am trying to insert a range of cell in the body of an outlook email with the same format. The code I am using now is below and it does insert anything in the email body.

Code:

Sub Mail()
Dim OutApp As Object
    Dim OutMail As Object
    Set OutApp = CreateObject("Outlook.Application")
    OutApp.Session.Logon
    Set OutMail = OutApp.CreateItem(0)
    On Error Resume Next
    With OutMail
        .To = "cbelcher@jpfryelaw.com"
        .CC = ""
        .BCC = ""
        .Subject = "Burden Report"
        .Body = ActiveSheet.Range("A1:D12")
        .Attachments.Add ("C:\Documents and   Settings\cbelcher\Desktop\Burden Report.xls")
End With
    On Error GoTo 0
    Set OutMail = Nothing
    Set OutApp = Nothing
    Set objMsg = Nothing
End Sub

I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.

Any help is appreciated. Here is an excerpt of the code:


Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR

' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh

I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA

I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks

Hi,

I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.

I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.

Code:

Sub Step4()
   On Error Resume Next
   Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub

I'm sure it's something simple... like me !

Any help much appreciated

Wrightie

is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)

Dear Sir,

If any one could give me a solution for this its will be a great help for me.

I am working in a bank and on every day we receive Month to date data of Loans and advances made by every branch with Region wise total and manager wise total. With Sum of loan and count of loan. In our MIS format the in A coulum branches are sorted and listed in a sequence with sub total Region. I have data where if if do the pivot and change the data the out put should be displayed accordingly in the MIS format. Can any one help me how can we do this or is there any other office addins/softwares are available if so the data is changed on a daily basis and if we do the pivot it will automatically copy the data to the MIS format.

Thanks.

Does anyone know if there is a customer format I can use to change the percent value of a cell to basis points? I tried creating my own, but was having difficulty. For example, if the cell value in A1 is 2%, I would like to have it say 200 basis points instead.

Thanks.

I have attached a schedule for shift allowance calculation. The conditions for payment are as follows:

3 & 4 shifts = 15% Basic
2 shifts = 10% Basic
If on leave for 21 working days or more, no shift allowance
If on leave for less than 21 working days and on 3 or 4 shifts, shift allowance prorated as (Basic*15%)/21*(diff. btw 21 and no of days leave observed)

If on leave for less than 21 working days and on 2 shifts, shift allowance prorated as (Basic*10%)/21*(diff. btw 21 and no of days leave observed)


The formular I used in the attached worked but the only problem is that I had to sort by no. of shifts and adjust the formular first. I need A formular that does not require sorting. I tried to combine IF, AND, OR formulae but I got error. Please assist me sort this out. Thanks a bunch.

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

I have found similar posts on the forum, but nothing without use of a userform.

I have the following code:

Code:

 
Sub Development()
    Pass = InputBox("Please enter development password", "Password")
    If Pass = "XYZ" Then
        UnhideAll
    Else: MsgBox ("Password incorrect, please try again")
    End If
End Sub

This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.

Help!

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

I'm unable to group/ungroup rows or columns on an excel worksheet that was
emailed to me by a co-worker. It's an existing file so I don't know what
restrictions were placed on the workbook. What can I do to fix this problem?