Business Card Page Layout Help |
Business Card Page Layout Help - Excel |
|
I am making a 12 month calendar (2 sided, 6months per side). It will be a wallet size business card (2x3.5"). I have the calendar made in excel and I want to print as many as possible on a 8.5x11 page. I will print the first 6 months, turn it around and print the next six months to make it double sided.
I need to somehow shrink or format the calendar to get 10 calendars/page (2 acroos the width, 5 down the page). Does anyone have any ideas on what might be the easiest way to do this. I will attach the calendar if anyone wants to see it.
I need to somehow shrink or format the calendar to get 10 calendars/page (2 acroos the width, 5 down the page). Does anyone have any ideas on what might be the easiest way to do this. I will attach the calendar if anyone wants to see it.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
How can I stretch a spreadsheet to fit the page? If I try to make it one page by one page, it changes nothing. If I change the percentage, it becomes two wide...I am just trying to change the height so that it can be read on an 8.5 x 11 piece of paper.
I added a print button to my userform
Code:
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
Code:
Private Sub btn1_Click() UserForm1.PrintForm End Sub
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
Even though I have used Page Layout to set my margins at .3 left and right, I cannot make my columns as wide as they need to be because the spreadsheet continues to print with one inch margins. I am on a deadline -- Help!
I automating a task at work that will save some time. Seems simple enough but for some reason the code I have to cause IE to wait unil ready doesnt seem to work in all cases.
Im using :
'wait until the page loads
Do While ie.Busy Or ie.readyState READYSTATE_COMPLETE
DoEvents
Loop
This doesnt seem to work well enough, since actions are occuring that should NOT occur until the browser is ready.
Any other ideas as to how to make IE wait until the page is completely ready? I wondered about possibly checking the .innerHTML to verify that a unique page element is present.
Thanks,
Scott
Im using :
'wait until the page loads
Do While ie.Busy Or ie.readyState READYSTATE_COMPLETE
DoEvents
Loop
This doesnt seem to work well enough, since actions are occuring that should NOT occur until the browser is ready.
Any other ideas as to how to make IE wait until the page is completely ready? I wondered about possibly checking the .innerHTML to verify that a unique page element is present.
Thanks,
Scott
I have a problem sometimes. I will click on a cell to add information.
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.
The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.
Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.
Thanks for any advice,
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.
The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.
Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.
Thanks for any advice,
I have a weird one here. I cannot scroll up or down on a particular worksheet. All the other sheets in the workbook operate successfully, but this one appears to be locked. I have tried both the right hand scroll bar and the mouse. The indicator on the scroll bar moves but the page is "stuck". I have copied it out to a new workbook and this is consistent behavior here too.
Cheers,
Doug
Cheers,
Doug
Imagine a whole box of lengths of aluminium sections for making windows.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
All on a sudden my mouse pointer in excel is not working properly. I cannot use my mouse to drag and fill, or to adjust the page break lines in the Page Break View mode. It always is in the shape of the white cross with black border and never changes it shape when pointed at the lower right edge of cells too. Now.......what to do in order to get out of this problem.
TIA
TIA
I need a formula to calculate Turn Around Time. Find below the sample data and details for your reference.
Received Date & Time: 10/29/2010 3:27:00 PM
Completed Date & Time: 11/1/2010 3:57:32 AM
Business Hours: 08:00 AM to 05:00 PM
Non Business hours: 05:00 PM to 08:00 AM
Weekdays : Monday to Friday
Weekends: Saturday & Sunday
If I calculate TAT for this time period it should show me 1 hour 33 minutes, why because business hours are closing by 5:00 PM on 10/29 so it should not calculate duration after 5:00 PM to until 08:00 AM on next day, however 10/29 is Friday so formula should calculate the duration from 10/29 Friday 3:37 PM to 10/29 5:00 PM and again it should calculate from 8:00 AM on 11/01 Monday and formula should skip Saturday & Sunday.
In this scenario I have completed the task before 8:00 AM on 11/01 so it should show duration of 1hour 33 minutes.
Please let me know if you need any more details
Received Date & Time: 10/29/2010 3:27:00 PM
Completed Date & Time: 11/1/2010 3:57:32 AM
Business Hours: 08:00 AM to 05:00 PM
Non Business hours: 05:00 PM to 08:00 AM
Weekdays : Monday to Friday
Weekends: Saturday & Sunday
If I calculate TAT for this time period it should show me 1 hour 33 minutes, why because business hours are closing by 5:00 PM on 10/29 so it should not calculate duration after 5:00 PM to until 08:00 AM on next day, however 10/29 is Friday so formula should calculate the duration from 10/29 Friday 3:37 PM to 10/29 5:00 PM and again it should calculate from 8:00 AM on 11/01 Monday and formula should skip Saturday & Sunday.
In this scenario I have completed the task before 8:00 AM on 11/01 so it should show duration of 1hour 33 minutes.
Please let me know if you need any more details
Here's my formula... =SUM(S7)-T5
If that number is less than -100, I want it to show as blank.
Any help?
Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.
Thanks.
If that number is less than -100, I want it to show as blank.
Any help?
Right now, I'm trying to accomplish this by making a conditional format...meaning when my cell equals less than -100 I make the cell color and font the same (so it looks blank, but its not). When I print it, it still shows the negative value.
Thanks.
Using VBA, I am trying to retrieve the contents of the Source of a web page (the same as would appear if you right-clicked on the page and chose "View Source") into a variable so I can work on it in VBA (using InStr, etc.).
The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?
Much obliged!
The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?
Much obliged!
I see a formula that our Human Resources Department is using to annualize voluntary turnover.
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
Very new in this board. If I post this question in the wrong forum please bear with me.
There is about 20 staffs in our department and I have made a spreadsheet with 12 tabs for each month of the year Jan-Dec. If each staff have 15 days annual leave each year and how can I make a formular that can automatically calculate the balance of annual leave and entered in the tabs of the following months. For example if staff A used 5 days in Jan how can the balance of 10days be entered in the tabs from Feb-Dec. If he use another 5 days in July the remain balance of 5 days be automatically entered in the tab from Aug to Dec. Likewise if staff A took 2 days sick leave in Jan, and 2 days in Mar how can this sick days be automatically sum up in the months after. I am doing this manually at the moment and it is very time consuming and also very easy to make mistake.
Thanks and sorry for this long questions
There is about 20 staffs in our department and I have made a spreadsheet with 12 tabs for each month of the year Jan-Dec. If each staff have 15 days annual leave each year and how can I make a formular that can automatically calculate the balance of annual leave and entered in the tabs of the following months. For example if staff A used 5 days in Jan how can the balance of 10days be entered in the tabs from Feb-Dec. If he use another 5 days in July the remain balance of 5 days be automatically entered in the tab from Aug to Dec. Likewise if staff A took 2 days sick leave in Jan, and 2 days in Mar how can this sick days be automatically sum up in the months after. I am doing this manually at the moment and it is very time consuming and also very easy to make mistake.
Thanks and sorry for this long questions
Hello, what I would like to do is take a portion of a sheet..... So the cells I want to mirror are in the proposal sheet cells B32 x F51. And then mirror the exact duplicate copy to another sheet. The other sheet should have those same values at A20 X G39. What I am trying to do is have a sheet that has skus, prices, and so forth and then when I add,delete, merge, color, or do anything to the cell on the "proposal creation" sheet I want it to mirror only a specific cells to another sheet that is "salesman copy" that we will print to clients. So this way ont he proposal copy a salesman can insert rows or even change the color of the cells and then have it mirror exactly the same on the "salesman copy" which is what we will print for clients. Thank you.
Hello,
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
I have a spread sheet that prints in duplex no matter what I do. I have made sure the printer duplex function is turned off but yet it insists in printing duplex. It is only this one workbook other workbooks print fine.
I hope you have an ansewer.
I hope you have an ansewer.
Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt
I have been using Excel (XP) to make a text chart for several months. Some of
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!
Hello, I am pretty new to excel programming/messing around so I'll refer to those who are much wiser than I am. I am trying to set up a form for work, in this form I want to have a page with a bunch of cells pre-sized. What I want to do is when I insert a picture from a job site, that when this picture gets inserted, it will automatically resize to fit within the cell. I don't have time to manually resize dozens of pictures and if I could get this to work it would be awesome! I tried to search for an answer using the search function, but I kept getting a fatal error about allowable memory? Thanks in advance for you help!
Hi! I am new to Excel and I am creating fillable forms in excel which are protected so that users canonly input data in certain cells. I am using Excel 2003. The users told me that they do not want text to go beyond the edge of the page when they are inputting data. They also want the words to wrap when they reach the end of the sentence. I am also using check boxes(yes/no) and Ifind it difficult to make the adjacent cells fillable only Thanks for your help and correct me if I am wrong as I am new to this board.