Vba To Open, Rename, Close Files In Directory |
Vba To Open, Rename, Close Files In Directory - Excel |
|
I have a large number of .txt files that get deposited in a directory. I'd like some code in Excel that will cycle through all the .txt files, open them and then close them in .xlsx format. (without any prompts, etc).
I know it's relatively simple but not sure how to cycle through files.
It's not a show-stopper, but would be good to point the code at a root folder which then has folders at the next level with the files in.
eg.
:\root folder\dir1\file1.txt
:\root folder\dir2\file2.txt
etc. where there can be any number or naming convention of folders under :\root folder
Similar Topics
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
Code:
Sub test() Name "C:\myfolder\*.aqi" As "C:\myfolder\*.csv" End Sub
The problem is that VBA does not accept wild cards (at least as given here).
Any suggestions?
Thanks
abe
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
Can anyone help?
Thanks
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:=Range("H10").Value & Format(Date, "mmdd")
This saves it as the correct cell value + the date, but it saves it to my documents. I need it to save to a shared folder on a network drive.
Any help would be greatly appreciated.
THANKS
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)
My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).
Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped
It does this using the indirect function because it needs to concatenate the
path and filename from other cells.
Problem is that if workbook B is closed, the cell in workbook A shows #REF!.
So can indirect work using closed external files or must the external files
be opened?
Is there a clever way of making that work?
Thanks!
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
i use in it alot of formulas and conditional formats
thank u
My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).
No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:
regsvr32 /u c:\windows\system32\MSCOMCT2.OCX
(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:
regsvr32 c:\windows\system32\MSCOMCT2.OCX
and what do you know - it worked.
Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
The following code is placed in workbook 'A' and is used to open workbook 'B'. These workbooks will now always be housed in the same directory and i want to change the code to use a relative path reference by determining the path of workbook 'A'. here's what I had:
Sub income_statement()
Application.WindowState = xlMaximized
Application.Workbooks.Open "C:\Documents and Settings\.....\workbook B.xls", UpdateLinks:=xlUpdateLinksAlways
End Sub
could you suggest how to change this to use a relative path reference?
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).