Convert Fractions To Decimals And Decimal To Fraction |
Convert Fractions To Decimals And Decimal To Fraction - Excel |
|
I know that if I enter =3/4 in a cell it will give me .75 but is there is formula to convert fractions into decimals or is this the best way to do it? I was also wondering if there is some way to convert the decimal amount to a fraction
for measurement conversions I know that
=B3*25.4 will convert a decimal to mm and so will the formula =CONVERT(E4,"in","mm")
and to convert mm to a decimal a few formula that work are
=CONVERT(H3,"mm","in")
=MROUND(H4/25.4, 1/8)
=H5/25.4
=INT(H6/25.39999918*8)/8
But is there a way to convert a fraction to the decimal and is there a way to convert mm to a fraction instead of the decimal equivalent of the fraction?
or maybe a formula to convert mm to inches but instead of the result being in decimal format it would be in fraction format?
for measurement conversions I know that
=B3*25.4 will convert a decimal to mm and so will the formula =CONVERT(E4,"in","mm")
and to convert mm to a decimal a few formula that work are
=CONVERT(H3,"mm","in")
=MROUND(H4/25.4, 1/8)
=H5/25.4
=INT(H6/25.39999918*8)/8
But is there a way to convert a fraction to the decimal and is there a way to convert mm to a fraction instead of the decimal equivalent of the fraction?
or maybe a formula to convert mm to inches but instead of the result being in decimal format it would be in fraction format?
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
i've been trying to figure this out on my own but seem to be hitting road blocks.
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
Hi guys,
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
In excel, I tried to convert numbers to number format, using
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
-Shane
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
-Shane
Hi,
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 8-4:30 or 10-3 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 8-4:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 8-4:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 8-6:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.
This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.
Or... does anyone have a better solution to keeping track of their hours?
Thanks!
Marty
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 8-4:30 or 10-3 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 8-4:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 8-4:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 8-6:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.
This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.
Or... does anyone have a better solution to keeping track of their hours?
Thanks!
Marty
I have a given length of steel bar...Example(550 feet)
I have various cut lengths that I can pick from...
14'-10".....13'- 9".. 12'-8"........(up to 6 different lengths)
I need to know the best combination of lengths to cut the long bar into to have minimal scrap left when we get to the end of the 550 feet.....
Cut as many of the longest cut lengths possiable.....Cut as few of the shortest cut lengths possiable
Due to the fact that I will have to convert this to a PLC application when completed, I want to find a mathmatical way to do this inside excel and not use the "solver"....Assuming that I/we can come up with an equation to do this .....
Any and all advice/help would be appricated.....
I have various cut lengths that I can pick from...
14'-10".....13'- 9".. 12'-8"........(up to 6 different lengths)
I need to know the best combination of lengths to cut the long bar into to have minimal scrap left when we get to the end of the 550 feet.....
Cut as many of the longest cut lengths possiable.....Cut as few of the shortest cut lengths possiable
Due to the fact that I will have to convert this to a PLC application when completed, I want to find a mathmatical way to do this inside excel and not use the "solver"....Assuming that I/we can come up with an equation to do this .....
Any and all advice/help would be appricated.....
I was able to convert start date and and end date to the number of days
inbetween the two dates. Does anyone know how to then convert the number of
days into months?
inbetween the two dates. Does anyone know how to then convert the number of
days into months?
Hi Guys,
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
I have a spreadsheet set up with an employees information, including the start date. After each year that the employee is working, he gets bumped up on the pay scale. For this reason, I only need to know how many years the employee has been working, rounded down to the nearest year.
This is what I have so far (hire date is in column B):
=((TODAY()-B4)/365)&" YEARS"
This function gives me a number with many decimal places.
I tried:
=ROUNDDOWN((TODAY()-B4)/365),0)&" YEARS"
It tells me I have too few arguments. Please help!
This is what I have so far (hire date is in column B):
=((TODAY()-B4)/365)&" YEARS"
This function gives me a number with many decimal places.
I tried:
=ROUNDDOWN((TODAY()-B4)/365),0)&" YEARS"
It tells me I have too few arguments. Please help!
Hi there,
How i can convert Hijra (Islamic) Dates into Gregorian?
a formula or VB
any help
How i can convert Hijra (Islamic) Dates into Gregorian?
a formula or VB
any help
Good afternoon,
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
I have data with time in standard fromat i.e. 3:00PM but I need it to be in
24 hour format i.e. 15:00. How can I do this?
24 hour format i.e. 15:00. How can I do this?
Does anyone know if there is a customer format I can use to change the percent value of a cell to basis points? I tried creating my own, but was having difficulty. For example, if the cell value in A1 is 2%, I would like to have it say 200 basis points instead.
Thanks.
Thanks.
My balance sheet is prepared in rupees.
I want to show all figures in Lacs like value 235600 show 23.56
In previous year i divided all values one by one by inputting /100000 but its so tedious.
Pl help.
I want to show all figures in Lacs like value 235600 show 23.56
In previous year i divided all values one by one by inputting /100000 but its so tedious.
Pl help.
I've been poking around trying to figure this out but can't. The time of 9 hours, 15 minutes is being returned from a calculation but I want the cell to display the 9.25 hours instead. This seems like something simple on the surface, but apparently it's not. Any help would be appreciated!
I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?
=SUMIF(D3:D13,"criteria",D3:D13)
I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)
It might just be that I don't know what this means in Help:
"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).
Can anyone help?
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I often use if statements to return empty cells, for example:
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
i have a worksheet with formulas in 15,000 cells; i have set the calculation to maunal so that you have to press F9 to calculate the sheet. \
sometimes, it takes 45 seconds to calc the whole sheet, other times, it takes 5 minutes. how do i clear the cache, or what do i have to do so that it calcs 45 seconds each time.
i don't want the application to think, it would be better if those 15,000 cells can be returned in a fraction-of-a-second. any ideas/tips? thanks.
sometimes, it takes 45 seconds to calc the whole sheet, other times, it takes 5 minutes. how do i clear the cache, or what do i have to do so that it calcs 45 seconds each time.
i don't want the application to think, it would be better if those 15,000 cells can be returned in a fraction-of-a-second. any ideas/tips? thanks.
Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks