Tricky One( Add Dialling Code In Front Of All Numbers In List) |
Tricky One( Add Dialling Code In Front Of All Numbers In List) - Excel |
|
so place 44 in A1 and the mobile number in b1, then i need a forumula for c1 to place a1 in front of b1
any help would be appreciated
thanks
Similar Topics
the cell an apostrophe apear in front of the text.
How can i correct this?
Thank you
lets suppose my numbers a 1,2,3,4,5,6,7,8,9,10,11
I want to generate all possibilities of the 6 numbers. But i dont want duplicate series.. I mean 1,2,3,4,5,6 and 6,5,4,3,2,1 are duplicates.
ANY HELPS ARE GREATLY APPRECIATED
James
Here's my question...I have a list of numbers and I want to know how many combinations (and what they are) of adding the numbers will equal an amount.
e.g.
List of Numbers
1
2
3
4
5
6
7
8
9
10
Amount to be reached = 12
These are some of the possible combinations to reach 12 :
2+10
3+9
4+8
5+7
3+4+5
6+3+2+1
Is there a function in Excel that will do this for me? I want to know which numbers (i.e. cells) can be added to reach 12. AND, if possible, colorcode the cells added for each combination.
Good luck and thanks!!
Here is my issue:
I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:
1) List of SKU's in cells:
34
35
39
55
2) text that needs to be added IN FRONT of every number:
DF
So the result would be:
DF34
DF35
DF39
etc.
How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.
I am using Office 2007 for mac.
Thank you for the help,
Chris
i would like to know how to change english numbers to arabic number on excel
, where when i change the language from english to arabic the numbers didnt
changed it still in english
For example my numbers are formatted like this: 1234 and I would like to add zeros to the end so it looks like this: 123400 (no decimal).
I would do it manually but I have a column of over 2000 different numbers.
Thanks for your help, you guys are great!
Thanks for any help.
45Romeo
I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?
I am ready to pay a cost per SMS if necessary.
(I asked the same question at another Excel forum without getting any reply.)
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers - including negatives.
If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
I need to disable all kinds of messages that could appear in front of the user when it opens the workbook. I am already using DisplayAlerts=False and On Error Resume Next? Can we also do this through excel application itself and not using VBA ?
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7 - I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
This is a very basic question, but i have been struggling for hours, so I must ask.
I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:
Sub Button1_Click() Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange") UserForm1.Show End Sub
I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated
regards
jim
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
DATA output should be
asd67,h876 --------> 67876
2,3,ujdj5&34 -------> 23534
909k86m34 --------> 9098634
Hope this makes sense?
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub