Convert 12345(figure) Into Word |
Convert 12345(figure) Into Word - Excel |
|
I also want to group the digit like 12,25,458
Both the answer should be in excel
Similar Topics
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt
I have a figure 4,929,524,832 in excel. I want excel to automatically covert this figure into millions/billions/trillions. I tried through 'format cells' but there was no option for this.
Any help?
Roy
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
i would like to know how to change english numbers to arabic number on excel
, where when i change the language from english to arabic the numbers didnt
changed it still in english
inbetween the two dates. Does anyone know how to then convert the number of
days into months?
up the next time when I enter it will not automatically come up. I must of
lost that option some how. Please help
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
I have 50 rows that I want to group. Rows 1-10 should be a group, 11-20 are a group, etc. The problem is, when I group 1-10 and then group 11-20 seperately, excel automatically makes 1-20 a single group and removes the individual groups that I wanted.
Any ideas?
Thanks in advance!
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
From the Excel main menu:
<data><group and outline><settings>
Uncheck: Summary rows below detail
Does that help?
***********
Regards,
Ron
XL2002, WinXP
"JMSprout" wrote:
> When you highlight rows, go to Data, then Group or Outline, then Group, it
> creates a nice plus/minus expand/collapse box for that group, only when the
> group is expanded the button to collapse it is at the bottom row of the
> group. Is there a way to get this button located at the top row of the group?
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7 - I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
It looks like this:
=(E3/((A3+D3)/2))*12/months
So if I substitute with some actual data:
=(6/((22+33)/2))*12/months the answer becomes 21.8% (as the annualized voluntary turnover rate).
What does the *12/months actually do mathematically? I cannot find it in the excel help files and have not been able to figure this out using math (on the calculator).
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
ex .. columm A & B & C is one group
columm D & E & F is a second group
etc ..
now I would like to add a name to the group in stead of an "+" I would like
to use a name .. does anybody know how to do it or is this a wishfull
thinking?
G.
I made a simple worksheet that we have been manually entering the time for employees, but there are too many errors (even with simple math). Can someone help me convert the time of ex: written 8-4:30 or 10-3 (meaning 8:00am to 4:30pm) where you have the total weekly hours? Right now I have a column for overtime. Is there a way to automatically calculate the over time also? The work day is 8-4:30 with a half hour lunch (lunch is not calculated into the hours, so you minus a half hour). 8-4:30 equals 8 hours. So, if a person works 8am to 6:30pm, how can I set it up where in the first row of time, I will type in 8-6:30pm. In the totals column to the far right, it will display 8 hours. In the (O.T.) column, it will display 2 hours.
This way, when I call in my payroll, I will have the total "regular" hours in one row and underneath, I will have the total overtime hours.
Or... does anyone have a better solution to keeping track of their hours?
Thanks!
Marty