Vlookup To Return Max Value From Multiple Hits 
Vlookup To Return Max Value From Multiple Hits  Excel 

Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B

1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Similar Topics
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
I have the following in G2:
=VLOOKUP(A2,Sheet1!A:D,4,FALSE)
The formula returns the correct result, which in this case is a number  2
When I fill down my range, the formula copies correctly, but every result is the same. 2.
However, if I go to the next cell down (G3) and activate it by pressing F2, and then hit Enter, the result changes and is now correct.
Any ideas whats going wrong?
Here is my issue:
I have a list of SKUs in Excel and I need to add one same word to 500 cells that have preexisting text in the cells. See example below:
1) List of SKU's in cells:
34
35
39
55
2) text that needs to be added IN FRONT of every number:
DF
So the result would be:
DF34
DF35
DF39
etc.
How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.
I am using Office 2007 for mac.
Thank you for the help,
Chris
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 16).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?
eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.
Other than creating a table and using a vlookup function, I am hoping there is a better way?
Darren
click double click on the cell before the formula recognises the account
number. I have to do this for each cell. I have tried different formats. It
is not saving me that much time.
I am hoping for some assistance. Here is what I have....
I am trying to get counts of certain values.
This is in the same workbook but different sheets.
On sheet 1 is where my formula lies. In a cell, I want it to look at sheet 2 column B and look for instances of "A", then I want it to look in the same row it found "A" and look at the value in column "N" and evaluate if there is an amount. If there isn't skip it and don't count it, if there is a value count it if it falls within a given range.
An example of the formula is below...what am I missing?
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=0:500))
=COUNTIF(Sheet2!B:B,(VLOOKUP(A,Sheet2!B:N,13,FALSE)=501:1000))
Thank you in advance for your assistance.
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug
James
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers  including negatives.
If the numbers are all positive, it's fine as it's simply a case of A  B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / 5 / 6
1 / 5 / 6
1 / 5 / 4
5 / 1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
e.g.
=A1
=A2
=A3
to
=$A$1
=$A$2
=$A$3
Thanks
So AHW18.787 becomes AHW18 787 and AHW18787 with
=SUBSTITUTE(A1,"."," ") and
=SUBSTITUTE(A1,".","") respectively, and
AHRTWA187007 becomes AHRTW A18 7007 and AHRTWA187007 with
=SUBSTITUTE(A1,""," ") and
=SUBSTITUTE(A1,"","").
What I need to be able to do is merge these formulas into one, so that no matter what format the part number is in A1, I get a version of it with spaces in B1, and a version of it with no spaces in C1. I just have not been able to nest it all together  is it even possible with this command?
Thx
Many Thanks
Karamazov
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin
format/cells/number from the category list. But it won't take, and stays
textlike. Any ideas?
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upperleft most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 45
rows.
Is there a way to copy each one  whether as a table or as text  into
a single Excel cell without losing data?
Many thanks.
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.