Payroll Question

I need a formula to calculate overtime, after a work week of 40 hours.

for example: if an employee works 10 hours a day we would not count towards overtime until the employee completes a 40 hour work week.

Any suggestions would be greatly appreciated!!!!!

Thanks,
YV

Hi,

This is a very basic question, but i have been struggling for hours, so I must ask.

I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:

Sub Button1_Click()
Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange")
UserForm1.Show
End Sub

I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated

regards
jim

I have a long list of item descriptions that I need to filter down to descriptions containing words like "valve" or "ring" or "root" or "epic" (17 key words in all). The basic custom filter looks like it only lets me filter for 2 words.

I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.

Hello everyone.

This is marc, i have one doubt in my mind. that was how to create automated attendance sheet with login name. i.e. there are 25 employees working in particular corporate sector. but HR or time keeper doesn't know who are present and absent. so if it is possible to create a login sheet which directly pop up the attendance in another sheet for the current date for particular employee. please help me. Thank you in advance,

...Marc

I'm using some basic code below in an on Workbook Open event to format cells with a value less then 2 and less than 1 with a particular color.

The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!

Code:

 
Dim myRange As Range
Dim cell As Range
Set myRange = Range("V6:V50000")
    For Each cell In myRange
    If cell.Value < 2 Then cell.Font.ColorIndex = 5
    If cell.Value < 1 Then cell.Font.ColorIndex = 3
    Next

I am trying to correct a formula for a productivity worksheet in excel. The idea is that we would have the ability to input the number of hours worked each day and the number of direct hours (working with clients) per day. Then take the daily percentages and add them then devide them to determine the final productivity percentage for the week. Additionally not everyone works a full week so I would need it to only divide the percentages of the days that were completed. Any suggestions? or does anybody know a formula that would accomplish this already? I am good with basic excel and was able to identify a flaw in the current productivity sheet.

Hello,

Please help!!!
We have a client who will pay using the 1/4, 1/2/ and 3/4 of an hour increments as follows:

From the hour mark to 6 minutes = 0 time paid
Over 7 minutes to 15 minutes = 1/4 hour 15
16 minutes to 30 minutes = 1/2 hour 30
30 minutes to 45 minutes = 3/4 hour 45
46 minutes to 60 minutes = one hour.

They work on shifts and the operation is 24 hours. Each gets 30 minutes for breaks which is not paid. Pay is biweekly and overtime is anything over 40 hours. Currently, the template we are using looks like this (sorry, I could not figure out how to paste it so you can see it in Excel layout):
WEEK 1 Sunday Monday Tuesday Wednesday Thursday Friday Saturday
5/16 5/17 5/18 5/19 5/20 5/21 5/22
TIME IN ENTER TIME, INCLUDE AM OR PM
TIME OUT
TIME IN
TIME OUT
TIME IN
TIME OUT
TIME IN Total Hours First Week
TIME OUT
HOURS WORKED-OR- choose one
*HOLIDAY WORKED
PAID HOLIDAY (not worked)
*OTHER PAID HOURS
EXPLANATION OF *HOLIDAY WORKED HRS OR *OTHER

I am very new to Excel and need help creating a formula that will allow us to calculate this timesheet? I am in desperate need for help.

Thanks..

Hi, I'm trying to get some macros to combine data from two open workbooks, and I can't figure out the commands to switch from the active workbook to the other open workbook and back. I'm new to VBA and just learning the ropes. All I can figure out is how to switch to another workbook with an exact name. If I record the macro to go to a recent file, for example Window > 1 (filename), the code that I get in VBA is Windows("filename").Activate. This doesn't translate to when I have two different workbooks with different filenames open.

Make sense? I'm a bit confused myself. Maybe just a list of basic workbook-switching techniques or commands would be useful.

- Michael

I am creating a basic accounting spreadsheet and I ask for assistance to automate data entry posts. I would like to have entries that are entered in the general journal automatically post to the corresponding ledger accounts. The entries need to remain in chronological order. Relative cell referencing will not work because the rows in the ledgers will not correlate to the rows in the journal because the journal but the entries in the ledger need to input on the next available row in that ledger account. Additionally, as the number of entries increase, can the ledger accounts add a new row?

Attached is a very simple example with three transactions. I have included an end state view in the ledger accounts tab.

A previous poster explained what I also need; there were no responses,
so I thought I would try again.

Does anyone know of an Excel template--or a small stand-alone
program--that will calculate the interest/principal breakdown when
payments are varied in amount and frequency? Free or low-cost, please.
I need one that will work on my Mac/Office 2004. I will need to print
out periodic reports.

Here is the way the previous poster described it:
"Excel template: Loan Amortization for random/irregular payments,
figures days
between payment dates.
I have a loan with a variable beginning balance and irregular payments
with
annual large payment. (based on collections)
Would like to enter payment and date.
then Excel would figure days since last payment, interest amount,
principal
amount, Ending Principal balance.
And total interest paid, total pricipal paid
If I change the starting principal, excel would recalculate all
entries."

Thanks very much.

Does anyone know of a non-commercial roster template that would suit 7 day/24 hour/4 person shifts?

Currently we use a totally manual spreadsheet which looks like a Rubik's Cube and does not offer any form of automation in order to speed up entry adn ensure no doubling-up or missing shifts.

I am creating a data sheet to be completed by other users. I would like to
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.

UPPER function cannot make cell look at itself and perform the function

Excel 2003

hi guys,

i have a simple spreadsheet where i'm totalling a few values thru a formula. it's similar to this:

=D13*F13

i'm trying to create a funcion that says if d13 * f13 >= 300, i want the value to stay at 300 max and at the same time, if d13 * f13 < 300, i want the total to remain whatever it is.

i have been able to create both of these formulas successfully by themselves but i can't combine them. is this possible?

any help would be greatly appreciated!!

Hello,

I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.

Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.

I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).

I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!

Thanks,
Jason

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.